IFM MX5015 Bruksanvisning

Läs gratis den bruksanvisning för IFM MX5015 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om IFM MX5015 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
Installation instructions
Speed sensor
MX5xxx
MX5xxx / 00 07 / 2015
UK
UK
UK
UK
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note.
2 Functions and features
The sensor detects without contact the rotational speed and the direction of rota-
tion of a toothed wheel made of ferromagnetic metal (e.g. mild steel) and signals
this with the switching signals A and B (24 V pulse). The pulse outputs enable the
external evaluation of rotational speed and direction of rotation.
See data sheet for sensing range and operating voltage.
3 Installation
3.1 Fixation
15
2
5
°
9
M6
Secure the unit against loosening by means of an M6 screw (not included).
3
UK
3.2 Alignment
Align the mounting lug parallel to the toothed wheel.
Other positions generate faulty or missing switching signals.
A surface characteristic of 15H7 is required for compliance with the protection
rating IP 69K.
4 Electrical connection
The sensor must be connected by a qualified electrician.
Observe the national and international regulations for the installation of
electrical equipment.
Disconnect power.
Connect the unit as specified in the data sheet.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: MX5015

Behöver du hjälp?

Om du behöver hjälp med IFM MX5015 ställ en fråga nedan och andra användare kommer att svara dig