IFM O4E500 Bruksanvisning

Läs gratis den bruksanvisning för IFM O4E500 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om IFM O4E500 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
Operating instructions
Through-beam sensor
O4E5xx / O4S5xx
706274 / 00 11 / 2012
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
Range: → type label.
3 Installation
transmitter receiver
Install the receiver (O4E...) and secure it to a bracket.
Align the transmitter (O4S ...) to the receiver and secure it in the same way.
Maximum range only with accurate alignment.
3
UK
4 Operating and display elements
1
2
3
1: LED yellow
2: [OUT on] button
3: [OUT off] button
receiver
5 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of
electrical equipment must be adhered to.
Ensure voltage supply to EN 50178.
Disconnect power.
Connect the unit as follows:
Transmitter connector
1
3
L+
L
pin 1 = L+
(pin 2: not connected)
pin 3 = L-
(pin 4: not connected)
Transmitter cable *


BN = L+
BU = L-
Receiver connector
pin 1 = L+
(pin 2 = not connected)
pin 3 = L-
pin 4 = load

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: O4E500

Behöver du hjälp?

Om du behöver hjälp med IFM O4E500 ställ en fråga nedan och andra användare kommer att svara dig