IFM O4S200 Bruksanvisning

Läs gratis den bruksanvisning för IFM O4S200 (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 2 recensioner. Har du en fråga om IFM O4S200 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Installation instructions
Through-beam sensor
O4S2xx / O4E2xx
706270 / 00 11 / 2012
UK
2
Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switched signal.
Range: 50 m.
Installation
12
1: Transmitter
2: Receiver
Mount the receiver (O4E ...) by means of a mounting fixture. Then align the trans-
mitter (O4S ...) to the receiver and fix it in the same way.
Maximum range is only achieved with precise alignment.
Electrical connection
Disconnect power before connecting the sensor. Connection strictly to the
indications on the type label.
Operation
Check the safe functioning of the sensor.
• The green LED (transmitter) lights when the unit is ready for operation.
• The yellow LED lights (receiver) when the switching output is switched.
Maintenance
Keep the lens of the sensor free from soiling. For cleaning do not use any solvents
or cleaning agents which could damage the plastic lenses.
3
UK
Technical data
You can download the data sheet from the Internet address www.ifm.com if
required.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: O4S200

Behöver du hjälp?

Om du behöver hjälp med IFM O4S200 ställ en fråga nedan och andra användare kommer att svara dig