IFM OG5097 Bruksanvisning

IFM sensor OG5097

Läs gratis den bruksanvisning för IFM OG5097 (8 sidor) i kategorin sensor. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 10 recensioner. Har du en fråga om IFM OG5097 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
Operating instructions
Diffuse reflection sensor
OG
701165 / 05 09 / 2005
UK
2
Contents
Function and features ����������������������������������������������������������������������������������������������3
Electrical connection������������������������������������������������������������������������������������������������3
Installation ���������������������������������������������������������������������������������������������������������������4
Setting of the sensitivity with stationary objects ������������������������������������������������������5
Setting of the sensitivity with moving objects ����������������������������������������������������������6
Setting of the maximum sensitivity ��������������������������������������������������������������������������7
Locking / Unlocking �������������������������������������������������������������������������������������������������7
Operation ����������������������������������������������������������������������������������������������������������������7
Function check output ������������������������������������������������������������������������������������������7
Maintenance ������������������������������������������������������������������������������������������������������������8
3
UK
Function and features
The diffuse reflection sensor detects objects and materials without contact and
indicates their presence by a switched signal
Range (r): see type label (value referred to white paper 200 mm x 200 mm)�
Electrical connection
The device shall be supplied from an isolating source and protected by
an overcurrent device such that the limited voltage circuit requirements in
accordance with UL 508 are met�
Isolate power, then connect the unit�
Connect the unit as follows:
DC PNP
BN
BK
BU
L+
L
BU
BK
BN
L+
L
L
L+
1
2
4
3
L
L+
3
2
4
1
Pin 2 = fc-output

Produktspecifikationer

Varumärke: IFM
Kategori: sensor
Modell: OG5097

Behöver du hjälp?

Om du behöver hjälp med IFM OG5097 ställ en fråga nedan och andra användare kommer att svara dig