IFM OGE081 Bruksanvisning

Läs gratis den bruksanvisning för IFM OGE081 (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3 recensioner. Har du en fråga om IFM OGE081 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Operating instructions
Through-beam sensor
OGE08x
OGS08x 
704942 / 00 10 / 2010
UK
2
1  Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
For the range see the type label.
2  Installation
Install the receiver (OGE08x) and secure it to a bracket.
Align the transmitter (OGS08x) to the receiver and secure it also to a bracket.
> Maximum range only with accurate alignment.
3  Electrical connection
Disconnect power.
Connect the unit as follows.
The device shall be protected by a Listed fuse rated 2A max
Recommendation: check the unit for reliable function after a short
circuit
3.1  Transmitter
2
3
L1
N
3
UK
3.2  Receiver
2
3
L1
N
4  Operation
Check whether the sensor operates correctly.
Receiver (OGE08x): The yellow LED is lit when the switching output is swit-
ched.
Transmitter (OGS08x): The green LED is lit when the sensor is ready for
operation.
5  Maintenance
Keep the lens of the sensor free from soiling.
For cleaning do not use any solvents or cleaning agents which could damage
the plastic material.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: OGE081

Behöver du hjälp?

Om du behöver hjälp med IFM OGE081 ställ en fråga nedan och andra användare kommer att svara dig