IFM OGE502 Bruksanvisning

Läs nedan 📖 manual på svenska för IFM OGE502 (5 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 3.5 stjärnor i genomsnitt av 3.5 användare

Sida 1/5
Operating instructions
Through-beam sensor
OGE3xx
OGS3xx
OGE5xx
OGS5xx
UK
80269721 / 00 08 / 2017
2
1 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
For the range see the type label.
2 Installation
transmitter receiver
Install the receiver (OGE...) and secure it to a bracket.
Align the transmitter (OGS...) to the receiver and fix it.
3 Electrical connection
Disconnect power.
Connect the unit as follows.
Transmitter
Cable Connector Pin connection
L+ BN pin 1
L- BU pin 3
pin 4
pin 2
Core colours BN = brown, BU = blue, BK = black
Receiver
Cable Connector Pin connection
L+ BN pin 1
L- BU pin 3
load BK pin 4
pin 2
Core colours BN = brown, BU = blue, BK = black
UK
3
4 Operating and display elements
transmitter receiver
 
1: LED
2: [OUT off]
3: [OUT on]
4 Settings
4.1 The receiver is to switch when the object is detected
1
Position the object.
receiver transmitter
Press [OUT on] for 2 s.
> The sensitivity is set to the object.
> The LED flashes.
2
Remove the object.
receiver transmitter
Press [OUT off].
> The sensitivity is set without object.
> The LED goes out. The programming is finished.
4.2
The receiver is not to switch when the object is detected
Position the object (see figure 1) and press [OUT off] for 2
s.
Remove the object (see figure 2) and press [OUT on].

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: OGE502

Behöver du hjälp?

Om du behöver hjälp med IFM OGE502 ställ en fråga nedan och andra användare kommer att svara dig