IFM OGP302 Bruksanvisning

Läs nedan 📖 manual på svenska för IFM OGP302 (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
Operating instructions
Retro-reflective sensor
OGP3xx
UK
UK
UK
UK
UK
704459 / 01 01 / 2009
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective
sensor detects objects and materials without contact and indicates their presence
by a switching signal.
Range: ( type label).
3 Installation
1
LED1:
Fit the prismatic reflector or the reflective tape behind the object to be detected.
Align the retro-reflective sensor to it and secure it to a bracket.
Maximum range only with accurate alignment.
3
UK
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of
electrical equipment must be adhered to.
Ensure voltage supply to EN 50178.
Disconnect power.
Connect the unit as follows:
Connector
L+
L
1
4
3
pin 1 = L+
(pin 2 = not connected)
pin 3 = L-
pin 4 = load
Cable
BN
BK
BU
L+
L
BN = L+
BU = L-
BK = load
Core colours: BN = brown, BU = blue, BK = black
5 Operation
Check whether the unit operates correctly.
Dark-on switching units (OGP-DPKG): the output is switched / the yellow LED
is lit when an object is detected.
Light-on switching units (OGP-HPKG): the output is switched / the yellow LED
is lit when no object is detected.
9 Maintenance, repair and disposal
Keep the front lens of the sensor free from soiling.
For cleaning do not use any solvents or cleaning agents which could damage
the plastic material.
Technical data and further information at
www.ifm.com Select your country Data sheet direct:→ →

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: OGP302
Färg på produkten: Zwart, zilver
Bredd: 230 mm
Djup: 220 mm
Höjd: 340 mm
Ljudnivå: 35 dB
Vattentankens kapacitet: 6 l
Lämplig för rum upp till: 40 m²
siffra: 1
Filtrering: Ja
AC-ingångsspänning: 110-120 V
AC-ingångsfrekvens: 50 - 60 Hz
Lämplig för rumsvolymer upp till: - m³
Förångningsteknik: Ultrasonic
Luftreningskapacitet: Ja
Befuktningskapacitet: 250 ml/u

Behöver du hjälp?

Om du behöver hjälp med IFM OGP302 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad IFM Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer