IFM OGP503 Bruksanvisning

Läs gratis den bruksanvisning för IFM OGP503 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om IFM OGP503 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
Operating instructions
Retro-reflective sensor
OGP50x
UK
704072 / 01 06 / 2011
2
1 Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective
sensor detects objects and materials without contact and indicates their presence
by a switching signal.
Range 0.03...5 m (on prismatic reflector Ø 80 mm; E20005).
2 Installation
Fit the prismatic reflector or the reflective tape behind the object to be detected.
Align the retro-reflective sensor to it and and secure it to a bracket.
Maximum range only with accurate alignment.
3 Electrical connection
Disconnect power.
Connect the unit as follows.
Cable Connector Pin connection
L+ BN pin 1
L- BU pin 3
load BK pin 4
pin 2
Core colours BN = brown, BU = blue, BK = black
UK
3
4 Operating and display elements
 
1: LED
2: [OUT off]
3: [OUT on]
4 Settings
4.1 The sensor is to switch when the object is detected
1
Position the object.
Press [OUT on] for 2 s.
> The sensitivity is set to the object.
> The LED flashes.
2
Remove the object.
Press [OUT off].
> The sensitivity is set without object.
> The LED goes out. The programming is finished.
4.2 The sensor is not to switch when the object is detected
Position the object (see figure 1) and press [OUT off] for 2
s.
Remove the object (see figure 2) and press [OUT on].
The settings can also be carried out first without object and then with object.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: OGP503

Behöver du hjälp?

Om du behöver hjälp med IFM OGP503 ställ en fråga nedan och andra användare kommer att svara dig