IFM OGT301 Bruksanvisning
IFM
Inte kategoriserad
OGT301
Läs gratis den bruksanvisning för IFM OGT301 (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3 recensioner. Har du en fråga om IFM OGT301 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
Operating instructions
Diffuse reflection sensor
OGT3xx
OGT5xx
704254 / 01 02 / 2010
UK
UK
UK
UK
UK
2
Functions and features
The diffuse-reflection sensor detects objects and materials without contact and
indicates their presence by a switched signal.
Range: see type label.
Installation
OUT on
OUT off
1
LED1:
Align the photocell and fasten to a mounting device. ►
Electrical connection
Disconnect power. ►
Connect the unit as follows. ►
Cable Connector Pin connection
L+ BN pin 1
L- BU pin 3
load BK pin 4
— — pin 2
Core colours BN = brown, BU = blue, BK = black
Setting of sensitivity and output function
The sensor is to switch when the object is detected:
1
OUT on
OUT off
Position the object, then press the [OUT on] button ►
LED flashes >
3
UK
2
OUT on
OUT off
Remove the object, then press the [OUT off] button ►
LED goes out >
The sensor is to switch when no object is detected:
Press the [OUT on] button when no object is present.1.
Position the object and press the [OUT off] button.2.
Setting of the maximum sensitivity
The sensor is to switch when the object is detected:
Align the unit so that no light is reflected. ►
First press the [OUT on] button then the [OUT off] button. ►
The sensor is to switch when no object is detected:
Align the unit so that no light is reflected. ►
First press the [OUT off] button then the [OUT on] button. ►
Lock or unlock the push buttons:
Press both buttons for 10 s. ►
Acknowledgement is indicated by a change of the yellow LED status. >
Programming failed:
The yellow LED flashes quickly (8 Hz). >
Measured value difference too small.•
Max. programming time of 15 min. exceeded.•
Operation
The LED is lit when the output is switched. •
Maintenance
Keep the lens of the sensor free from soiling. For cleaning do not use any solvents
or cleaning agents which could damage the plastic lenses.
Produktspecifikationer
| Varumärke: | IFM |
| Kategori: | Inte kategoriserad |
| Modell: | OGT301 |
Behöver du hjälp?
Om du behöver hjälp med IFM OGT301 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad IFM Manualer
8 April 2025
8 April 2025
8 April 2025
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
31 Mars 2025
12 Mars 2025
Inte kategoriserad Manualer
- Outwell
- Master Lock
- Herkules
- GEV
- ProUser
- Black And Decker
- Cooper Lighting
- Ultimate Support
- Liebherr
- AMERRY
- Contour
- KKT Kolbe
- Tesseract Modular
- Insect Lore
- Wehkamp
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025