IFM OL0009 Bruksanvisning

Läs nedan 📖 manual på svenska för IFM OL0009 (9 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/9
Operating instructions
Diffuse reflection sensor
OL
701271 / 04 12 / 2010
UK
2
Contents
Function and features 3 ����������������������������������������������������������������������������������������������
Electrical connection������������������������������������������������������������������������������������������������3
Montage�������������������������������������������������������������������������������������������������������������������4
Commissioning 4 ��������������������������������������������������������������������������������������������������������
Setting of the sensitivity with stationary objects 5 ������������������������������������������������������
Setting of the sensitivity with moving objects 6 ����������������������������������������������������������
Setting of the maximum sensitivity 7 ��������������������������������������������������������������������������
Programming the output function 7 ����������������������������������������������������������������������������
Operation 8 �����������������������������������������������������������������������������������������������������������������
Maintenance 8 ������������������������������������������������������������������������������������������������������������
3
UK
Function and features
The diffuse reflection sensor detects objects and materials without contact and
indicates their presence by a switched signal�
Range (r): see type label (value referred to white paper 200 mm x 200 mm)
Electrical connection
Isolate power, then connect the unit�
Connect the unit as follows:
AC/DC Relais
Sensor with terminals Sensor with connector



Insert a miniature fuse according to the technical data sheet, if specified�
Core colours (for sensors with cable connection): BN = brown, BU = blue,
BK = black, WH = white�
Programming of the output function by push button (see page 7)�
The units with cable gland have a removable terminal block with screw terminals
(screws are at the base of the terminal block)�
After connection of the wires the terminal block must be reinserted�
Check the unit for reliable function after a short cirucit�

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: OL0009

Behöver du hjälp?

Om du behöver hjälp med IFM OL0009 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad IFM Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer