IFM PY1708 Bruksanvisning
IFM
Inte kategoriserad
PY1708
Läs gratis den bruksanvisning för IFM PY1708 (15 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2 recensioner. Har du en fråga om IFM PY1708 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/15

Operating instructions
Electronic pressure sensor
PY1708
80289616 / 00 10 / 2019
UK

2
Contents
1 Preliminary note 3 ���������������������������������������������������������������������������������������������������
1�1 Symbols used 3 ������������������������������������������������������������������������������������������������
2 Safety instructions 3 �����������������������������������������������������������������������������������������������
3 Functions and features 4 ����������������������������������������������������������������������������������������
3�1 Applications ���������������������������������������������������������������������������������������������������4
4 Function ���������������������������������������������������������������������������������������������������������������5
4�1 Set-up via IO-Link 5 ������������������������������������������������������������������������������������������
4�2 Scalable measuring range 5 �����������������������������������������������������������������������������
4�3 Process data via IO-Link 5 �������������������������������������������������������������������������������
4�4 Defined state in case of a fault 5 ����������������������������������������������������������������������
4�5 Operating modes 5 �������������������������������������������������������������������������������������������
4�5�1 2-wire operation 6 ������������������������������������������������������������������������������������
4�5�2 3-wire operation 6 ������������������������������������������������������������������������������������
4�6 Analogue function 6 ������������������������������������������������������������������������������������������
4�7 IO-Link �����������������������������������������������������������������������������������������������������������7
5 Installation������������������������������������������������������������������������������������������������������������8
6 Electrical connection 9 ��������������������������������������������������������������������������������������������
7 Parameter setting 10 ����������������������������������������������������������������������������������������������
7�1 Parameter setting via PC 10 �����������������������������������������������������������������������������
7�2 Parameter setting via the memory plug 10 �������������������������������������������������������
7�3 Teach offset with the teach button ��������������������������������������������������������������� 11
7�3�1 Scale analogue value 12 �������������������������������������������������������������������������
7�3�2 Select the standard unit of measurement (option) 12 ������������������������������
7�4 User settings (optional) 12 ��������������������������������������������������������������������������������
7�4�1 Set damping for the analogue output 12 �������������������������������������������������
7�4�2 Set damping for the switching signal 12 ��������������������������������������������������
7�4�3 Zero-point calibration 12 ��������������������������������������������������������������������������
7�5 List of the parameters 13 ����������������������������������������������������������������������������������
7�6 Diagnostic functions 13 ������������������������������������������������������������������������������������
7�6�1 Read min/max values system pressure 13 ����������������������������������������������
8 Operation �����������������������������������������������������������������������������������������������������������13
9 Factory setting 14 ���������������������������������������������������������������������������������������������������

3
UK
1 Preliminary note
1.1 Symbols used
►Instruction
> Reaction, result
[…] Designation of keys, buttons or indications
→Cross-reference
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note
2 Safety instructions
• The device described is a subcomponent for integration into a system�
- The manufacturer is responsible for the safety of the system�
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system� This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system�
• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
• Only use the product for its intended purpose (→ Functions and features).
• Only use the product for permissible media (→ Technical data).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
Produktspecifikationer
Varumärke: | IFM |
Kategori: | Inte kategoriserad |
Modell: | PY1708 |
Behöver du hjälp?
Om du behöver hjälp med IFM PY1708 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad IFM Manualer
8 April 2025
8 April 2025
8 April 2025
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
31 Mars 2025
12 Mars 2025
Inte kategoriserad Manualer
- Danby
- Lasita Maja
- Casablanca
- Tracer
- Duux
- Ematic
- Ultimate
- On-Q
- Toyotomi
- Roba
- Tesy
- Senco
- Norton Clipper
- Silva
- Nitecore
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025