IFM SF5201 Bruksanvisning
IFM
Inte kategoriserad
SF5201
Läs gratis den bruksanvisning för IFM SF5201 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 9 recensioner. Har du en fråga om IFM SF5201 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
Installation Instructions
Flow sensor
SF5201
SF5301
701725 / 02 05 / 2009
UK
2
Function and features
In conjunction with the VS3000 control monitor the flow sensor monitors flows in
liquids and gases.
The sensor / control monitor combination senses whether a preset flow value has
been reached (= medium flowing) or not (= medium not flowing) and provides a
switched signal.
Installation
The unit is adaptable for various process fittings (adapters to be ordered sepa-
rately as accessories).
In the case of horizontal pipes mount the unit from the side, if possible (fig. 1).•
When the unit is to be mounted at the bottom of the pipe, it should be free -
from deposits.
When the unit is to be mounted at the top of the pipe, it should be completely -
filled with the medium to be monitored.
In the case of vertical pipes mount the unit in a place where the medium flows •
upwards (fig. 2).
1 2
Components integrated in the pipes, bends, valves, reductions, etc. lead to turbu-
lence of the medium. This affects the function of the unit.
Recommendation: Adhere to the distances between sensor and sources of
interference:
5...10 x D
S
3...5 x D
S
D = pipe diameter; S = sources of interference
3
UK
1 2 3
î
í
ì
A
4
4: thread M18 x 1.5
Lubricate the nut (3) and all threads with grease to ensure the nut can be 1.
loosened and tightened several times.
Note: No grease must be applied to the sensor tip (A).
Screw the suitable adapter (2) onto the process fitting (1).2.
Insert the flow sensor into the adapter and tighten the nut (3); (max. tightening 3.
torque 50 Nm).
Insertion depth of the sensor: min. 12 mm in the pipe. When the adapters are
used which are available as accessories the correct depth is ensured.
Note: The sensor tip must not touch the pipe wall.
mounting dimension
with M12 adapter
mounting dimension
with G¼ adapter
mounting dimension
with G½ adapter
37
23,5
37
23,5
45
31
Produktspecifikationer
| Varumärke: | IFM |
| Kategori: | Inte kategoriserad |
| Modell: | SF5201 |
Behöver du hjälp?
Om du behöver hjälp med IFM SF5201 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad IFM Manualer
8 April 2025
8 April 2025
8 April 2025
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
31 Mars 2025
12 Mars 2025
Inte kategoriserad Manualer
- Tru Components
- Lockwood
- Joie
- Vinpower Digital
- Thorens
- Maxcom
- Fitbit
- CDA
- Parrot
- Ibiza Sound
- Catlink
- Morphy Richards
- Metra
- Al-ko
- Horizon Fitness
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025