IFM UGT210 Bruksanvisning
IFM
Inte kategoriserad
UGT210
Läs gratis den bruksanvisning för IFM UGT210 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4 recensioner. Har du en fråga om IFM UGT210 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
Operating instructions
Ultrasonic diffuse-reflection sensor
without IO-Link
UGT20x
UGT21x
UGT50x
UGT52x
80237715 / 00 02 / 2019
UK
2
1 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and environ-
mental conditions without any restrictions.
• Only use the product for its intended purpose .(→ 2 Functions and features)
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• Protect units and cables against damage.
2 Functions and features
Ultrasonic sensor for monitoring levels and detecting objects.
3 Installation
1
2
►Secure the unit to a bracket.
1: Status LED (yellow), setting aid and
output indication
2: Echo LED (green), is on when object or
background is detected
Sound-absorbing surfaces have a negative effect on a reliable function.
► Technical data sheet): Consider the dead zone (→
No object detection in the dead zone.
3
UK
For units with metal housing (according to UL 508):
►Observe a minimum distance of 12.7 mm between the sensor and non-
insulated live parts.
For further information please refer to www.ifm.com
→ General information about installation and operation.
4 Electrical connection
►Disconnect power.
► Connect unit (depending on the type selected):
BK: black
BN: brown
BU: blue
WH: white
L+
L
1
4
3
OUT
2WH
BN
BK
BU
Teach
L+
L
1
4
3
OUT
2WH
BN
BK
BU
Teach
Units with switching output
• OUT: switching output
• Teach: programming wire
Units with analogue output
• OUT: analogue output
• Teach: programming wire
Colours to DIN EN 60947-5-2
5 Settings
The unit and the parameters are set via the teach programming wire
(→ 5.1).
5.1 Wire teach
Switching output:
Teach with L+ (PNP)
Switching output:
Teach with L- (NPN)
Analogue output:
Teach with L -
L+
L
1
4
3
OUT
Teach
2WH
BN
BK
BU
L+
L
1
4
3
OUT
Teach
2WH
BN
BK
BU
L+
L
1
4
3
OUT
2WH
BN
BK
BU
Teach
If programming has not been completed successfully, the unit returns to
the previous setting.
Produktspecifikationer
| Varumärke: | IFM |
| Kategori: | Inte kategoriserad |
| Modell: | UGT210 |
Behöver du hjälp?
Om du behöver hjälp med IFM UGT210 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad IFM Manualer
8 April 2025
8 April 2025
8 April 2025
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
31 Mars 2025
12 Mars 2025
Inte kategoriserad Manualer
- Dell
- Hombli
- Swift
- MYVU
- Pyramid
- Binatone
- Meridian
- Monacor
- Bigben
- Garmin
- Life Gear
- Thrustmaster
- Cinderella
- Sogo
- MOZOS
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025