IFM VSE953 Bruksanvisning

IFM Inte kategoriserad VSE953

Läs gratis den bruksanvisning för IFM VSE953 (21 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om IFM VSE953 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/21

Operating instructions

Diagnostic electronics

with Modbus TCP interface for vibration sensors

VSE953

11371835 / 0003 / 2021

VSE953 Diagnostic electronics

Contents

1 Safety instructions............................................................ 3

2 Preliminary note.............................................................. 4

2.1 Symbols used........................................................... 4

2.2 Warnings used.......................................................... 4

3 Intended use ................................................................ 5

4 Device functions.............................................................. 6

4.1 Function description...................................................... 7

4.2 Firmware .............................................................. 7

5 Mounting ................................................................... 8

5.1 Emission .............................................................. 8

5.2 Sources of interference ................................................... 8

5.3 Cable routing........................................................... 8

5.4 Installation instructions.................................................... 8

6 Electrical connection .......................................................... 9

6.1 Wiring................................................................. 9

6.2 Connection of the sensors................................................. 10

7 Modbus TCP ................................................................ 11

7.1 Properties.............................................................. 11

7.2 Data model............................................................. 11

7.3 Register............................................................... 14

7.3.1 Device identification register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

7.3.2 Register mapping input (FC4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

7.4 Input function code....................................................... 14

7.5 Register mapping output (FC3, FC6 and FC16). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

7.6 Output function code ..................................................... 15

7.7 Exception response...................................................... 15

7.8 Factory setting VSE953 - Modbus TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

7.9 General factory setting.................................................... 15

7.10 Note for programmers .................................................... 15

7.11 Parameter setting........................................................ 16

8 Operating and display elements.................................................. 17

8.1 Operating states of the network (NET) and mode (MOD) status LED . . . . . . . . . . . . . . . . 17

9 Maintenance, repair and disposal ................................................ 18

Diagnostic electronics VSE953

1 Safety instructions

• The unit described is a subcomponent for integration into a system.

– The system architect is responsible for the safety of the system.

– The system creator undertakes to perform a risk assessment and to create documentation in

accordance with legal and normative requirements to be provided to the operator and user of

the system. This documentation must contain all necessary information and safety instructions

for the operator, the user and, if applicable, for any service personnel authorised by the

architect of the system.

• Read this document before setting up the product and keep it during the entire service life.

• The product must be suitable for the corresponding applications and environmental conditions

without any restrictions.

• Only use the product for its intended purpose ( Intended use).Ò

• If the operating instructions or the technical data are not adhered to, personal injury and/or damage

to property may occur.

• The manufacturer assumes no liability or warranty for any consequences caused by tampering with

the product or incorrect use by the operator.

• Installation, electrical connection, set-up, operation and maintenance of the product must be

carried out by qualified personnel authorised by the machine operator.

• Protect units and cables against damage.

Produktspecifikationer

Varumärke:	IFM
Kategori:	Inte kategoriserad
Modell:	VSE953
Färg på produkten:	Zwart
Vikt:	1050 g
Bredd:	317 mm
Djup:	87 mm
Höjd:	193 mm
Användarmanual:	Ja
LED-indikatorer:	ADSL, LAN, Link, Power, USB, WAN, WLAN
På / Av knapp:	Ja
Wi-Fi-standarder:	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Generering av mobilt internet:	4G
USB uttag:	Ja
Ethernet LAN:	Ja
Typ av strömkälla:	AC
Medföljande kablar:	AC, DSL, LAN (RJ-45)
Snabbstartsguide:	Ja
Inkluderar AC-adapter:	Ja
Indikator ljus:	Ja
Antal USB 2.0-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	4
Anslutning för nätadapter:	Ja
Internminne:	512 MB
SIM-kortplats:	Nee
3G/4G USB-modemkompatibilitet:	Ja
Minneskortplats(er):	Nee
Antal RJ-11-portar:	2
Wifi-band:	Dual-band (2.4 GHz / 5 GHz)
WiFi-standard:	Wi-Fi 5 (802.11ac)
WLAN-dataöverföringshastighet (max):	1734 Mbit/s
Gränssnittstyp Ethernet LAN:	Gigabit Ethernet
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Kabelteknik:	10/100/1000Base-T(X)
Nätverksstandard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.3i, IEEE 802.3u
Säkerhetsalgoritmer som stöds:	WPA-PSK, WPA2-PSK, WPS
Antenner kvantitet:	4
3G:	Nee
4G:	Nee
Firmware-uppgradering möjlig:	Ja
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	1
Webbaserad hantering:	Ja
Stöder Mac-operativsystem:	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion
Återställningsknapp:	Ja
xDSL-anslutning:	Ja
Ethernet WAN:	Ja
Brandvägg:	Ja
Utström:	3 A
Spännande:	12 V
Flashminne:	256 MB
DHCP-server:	Ja
Quality of Service (QoS):	Ja
Nätverksadressöversättning (NAT):	Ja
DSL WAN:	Ja
WPS-tryckknappssäkerhet:	Ja
Löstagbara antenner:	Ja
AC-ingångsspänning:	110 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Typ produkt:	Router om neer te zetten
VPN-egenskaper:	PPTP server\nOpen VPN server\nPPTP client\nL2TP client\nOpen VPN client
Antenndesign:	Extern
VDSL:	Ja
ADSL:	Ja
ADSL2+:	Ja
ADSL2:	Ja
VDSL2:	Ja