IFM VTV122 Bruksanvisning
IFM
Inte kategoriserad
VTV122
Läs gratis den bruksanvisning för IFM VTV122 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3.5 recensioner. Har du en fråga om IFM VTV122 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Operating instructions
Vibration transmitter
VTV122
704952/02 08/2014
UK
2
Symbols used
►Instruction
Important note
Non-compliance can result in malfunctions or interference.
1 Safety instructions
• Please read the product description prior to set-up of the unit. Ensure that the
product is suitable for your application without any restrictions.
• The unit conforms to the relevant regulations and EC directives.
• Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application.
• That is why installation, electrical connection, set-up, operation and
maintenance of the unit must only be carried out by qualified personnel
authorised by the machine operator.
2 Functions and features
The vibration transmitter detects the vibration in the system (measured / evaluated
physical unit = vibration velocity). This is converted into an analogue signal at the
current output.
3 Installation
►Mount only in a thick housing wall
(e.g. transport thread).
►Ensure that the signal direction is
correct.
►Ensure a safe vibration transmissi-
on and allow no elastic intermediate
layers.
3
UK
►Select either the ¼“-28 UNF / M8
(2) or the ¼“-28 UNF (3) threaded
adapter and insert into the unit (1).
Both adapters are supplied.
►Tighten using a 3 mm Allen key.
Tightening torque 8 Nm.
►Drill and tap a hole at the mounting
location:
- M8 hole / depth min. 10 mm
- or ¼“ UNF hole / depth min.
13 mm.
►Tighten the sensor with a tightening torque of 8 Nm.
4 Electrical connection
The unit must be connected by a qualified electrician. The national and
international regulations for the installation of electrical equipment must be
adhered to.
M12
4
1 2
3
L+
L
1
2
Pin 1: L+ (9.6...32 V DC)
Pin 2: 4...20 mA
4.1 Measuring range
v
eff mm/s 0...25
Iout mA 4...20
Response delay s 0,5
Frequency range Hz 10...1000
Produktspecifikationer
| Varumärke: | IFM |
| Kategori: | Inte kategoriserad |
| Modell: | VTV122 |
Behöver du hjälp?
Om du behöver hjälp med IFM VTV122 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad IFM Manualer
8 April 2025
8 April 2025
8 April 2025
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
31 Mars 2025
12 Mars 2025
Inte kategoriserad Manualer
- Herkules
- ActiveJet
- Pro-User
- Twisted Electrons
- Facal
- Trixie
- Owon
- BT
- Dr. Browns
- Hollyland
- AudioControl
- MOZA
- Williams Sound
- Vocopro
- UNITEK
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025