IFM ZZ0432 Bruksanvisning

Läs gratis den bruksanvisning för IFM ZZ0432 (7 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 1.5 recensioner. Har du en fråga om IFM ZZ0432 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/7
Short instructions
Cooling water control panel
ZZ0432
80000588 / 00 10 / 2021
UK
UK
UK
UK
UK
2
1 System overview
1
3 4 5
350
360
33
426,8
129,1
M22x1,5R
½
2
67
8
1 Flow sensor Monitors and indicates the cooling water flow rate.
The setting of two switch points enables detection of:
- excess flow (leakage / burst pipes / lost tips),
- low flow (clogged /damaged pipes).
3
UK
2 Water stop valve Closes the water supply to the system in case of failure and
prevents water spillage.
3 Backstop Prevents cooling water loss through the return pipe in case of
failure (broken tip / burst pipe).
4 Regulating valve Continuous regulation of the flow rate.
5 Pressure sensor Monitors the operating pressures, very fast response times are
attained if pressure falls (broken tips).
6 Expansion
cylinder
When a welding tip is replaced or if there is a fault (2/2-way
valve in the inlet pipe is closed), the expansion cylinder actively
sucks back the cooling water and switches off the pressure.
7 5/2-way valve The 5/2-way valve controls the expansion cylinder.
8 tube connection Ø 8 mm
► →Observe the instructions of the sensors www.ifm.com.
2 Functions and features
Pressure Equipment Directive (PED)
The units comply with the Pressure Equipment Directive and are designed
and manufactured for group 2 fluids in accordance with the sound engineering
practice.
Use of group 1 fluids on request.
3 Setting of the flow sensor
The flow sensor monitors the flow rate in the supply pipe by means of a window
function. This is achieved by setting the output function of the two outputs:
OU1 and OU2 = Fno, window / normally open. With this setting an acceptable
range is monitored.
The flow rate depends on the water supply and the set-up of the welding tongs.
The setting of the switch-on points (SP1, SP2) and the switch-off points (rP1, rP2)
depends on the installation.
Optimum monitoring of the start up characteristics as well as processrelated flow
fluctuations during operation is possible via additional monitoring times in the
robot software.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: ZZ0432
Bredd: 305 mm
Djup: 244 mm
Användarmanual: Ja
Blåtand: Ja
Wi-Fi-standarder: 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth-version: 4.2
Grafikadapter: HD Graphics
Ethernet LAN: Ja
Maximal upplösning: 4096 x 2304 Pixels
Typ av strömkälla: ATX
Medföljande kablar: SATA
Antal USB 2.0-portar: 4
Antal HDMI-portar: 1
Antal Ethernet LAN (RJ-45)-portar: 1
HDMI-version: 1.4b
Antal DisplayPorts: 1
Stöder Windows: Windows 10 Education x64, Windows 10 Enterprise x64, Windows 10 Home x64, Windows 10 Pro x64
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A: 4
Processoruttag: LGA 1151 (Socket H4)
Processorfabrikant: Intel
Maximalt internminne: 64 GB
Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ C: 1
Ljudutgångskanaler: 7.1 kanalen
Chipset moderkort: Intel® Z370
Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ A: 1
DisplayPort-version: 1.2
Typ av minnesplats: DIMM
Ljudchip: Realtek S1220
Medföljande drivrutiner: Ja
Grafikkortsfamilj: Intel
S/PDIF-utgång: Ja
Minneskanal: Dubbelkanaals
PCI Express x16 (Gen 3.x)-platser: 3
PCI Express x1 (Gen 3.x)-platser: 3
Intel® Optane™ Memory Ready: Ja
Komponent för: PC
LAN-kontroller: Intel® I219-V
Typer av RAID: 0, 1,5, 10
Antal SATA III-kontakter: 6
Icke-ECC: Ja
Vakna på LAN: Ja
Kompatibla processorer: Intel Core i3, Intel Core i5, Intel Core i7
Minnestyper som stöds: DDR4-SDRAM
Max. antal SMP-processorer: 1
Wifi: Ja
Moderkort chipset familj: Intel
Moderkorts formfaktor: ATX
Antal minnesplatser: 4
Minnesklockhastigheter som stöds: 2133,2400,2666,2800,3000,3200,3300,3333,3400,3466,3600,3733,3866,4000,4133 MHz
BIOS-typ: UEFI AMI
BIOS-minnesstorlek: 128 Mbit
ACPI-version: 5.0
Stöd för parallell bearbetning: 2-Way SLI, 3-Way CrossFireX, Quad-GPU CrossFireX, Quad-GPU SLI
Anslutning för CPU-kylare: Ja
Anslutningar för husfläktar: 3
ATX-strömkontakt (24-stift): Ja
Frontpanelkontakt: Ja
USB 2.0-anslutningar: 1
Anslutning för ljudpanel på framsidan: Ja
Obuffrat minne: Ja
USB 3.2 Gen 1 (3.1 Gen 1) anslutningar: 1
EPS-strömkontakt (8-stift): Ja
Rensa CMOS-knappen: Ja
Intel® Extreme Memory Profile (XMP): Ja
Antal M.2 (M) platser: 2
12V strömkontakt: Ja
USB 3.2-kontakter (3.1 Gen 2): 1

Behöver du hjälp?

Om du behöver hjälp med IFM ZZ0432 ställ en fråga nedan och andra användare kommer att svara dig