IFM ZZ0600 Bruksanvisning

Läs nedan 📖 manual på svenska för IFM ZZ0600 (5 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
Short instructions
Cooling water control panel
ZZ0600
80280620 / 00 12 / 2018
UK
UK
UK
UK
UK
2
1 System overview
1
2 3
95
220
339
G ½
1 Flow sensor Monitors and indicates the cooling water flow rate.
The setting of two switch points enables detection of:
- excess flow (leakage / burst pipes / lost tips)
- low flow (clogged /damaged pipes).
2 Regulating valve Regulation of the flow rate.
3
UK
3 Temperature
sensor
Monitoring of the return temperature
.
Observe the instructions of the sensors → www.ifm.com
→ SM6000 and TA2405.
2 Functions and features
Pressure Equipment Directive (PED)
The units comply with the Pressure Equipment Directive and are designed
and manufactured for group 2 fluids in accordance with the sound engineering
practice.
Use of group 1 fluids on request.
3 Setting of the flow sensor
The flow sensor monitors the flow rate in the supply pipe by means of a window
function. This is achieved by setting the output function of the two outputs: OU1
and OU2 = Fno, window / normally open. With this setting an acceptable range is
monitored.
The flow rate depends on the water supply.The setting of the switch-on points
(SP1, SP2) and the switch-off points (rP1, rP2) depends on the installation.
Optimum monitoring of the start up characteristics as well as processrelated flow
fluctuations during operation is possible via additional monitoring times in the
controller.

Produktspecifikationer

Varumärke: IFM
Kategori: Inte kategoriserad
Modell: ZZ0600

Behöver du hjälp?

Om du behöver hjälp med IFM ZZ0600 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad IFM Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer