Iget M3P9 Bruksanvisning
Sidor 2 Engelska Detektor
Läs bruksanvisningen för Iget M3P9 gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 22 gånger. Fråga om modellen? Ställ en fråga
• Working VoltageDC 1.5V
• Battery 1 × AAA battery(1.5V)
• Working Current55~65mA
• Standby Current9.5μA~11μA
• Transmission Distance Without obstacle 100m
• Transmission Frequency433.29MHz
• Working Temperature-10℃~40℃
• Humidity ≤90%rh (non-condensing)
• Weight 32.3g(Battery not included) 43.5g(Battery included)
• Dimension Transmitter :80.0mm*38.2mm*13.3mm(L*W*H)
Connecting Line: 21cm
Installation Manual |
Wireless Water Intrusion Sensor
Instalační Manuál |Bezdrátový detektor vody
Inštalačný Manuál |Bezdrôtový detektor vody
Website : www.iget.eu E-mail : sales@iget.eu
Features
Parameters
Appearance
The iGET SECURITY M3P9 wireless water intrusion sensor is an accessory of M3/M4 series smart alarm system. It's fashion
design, energy saving, and low battery warning supported. The main panel will send a SMS to user for battery replacement
when needed. It triggers alarm when detecting water intrusion.
SECURITY M3P9
PCB Layout
Operating Instructions
Installation & Notice
Battery replacement instructions
1. Working principle
The transmitter sends trigger signal to paired main panel when the sensor detects water intrusion.
2. Pairing with main panel by App
①Scan the QR code printed on the sensor and follow the guideline in App to continue.
②The pairing result would be confirmed by SMS sent from main panel.
Trigger Mode Clarication
• Open the case and remove the battery insulative strip.
• Pair it with panel by App before installing.
• Attach the transmitter with the double-side sticky tape to proper positon. Avoid installing it in any area with a large amount
of metal or electric wires.
• Fix the connecting line on wall or any proper position.
• Fix the probe on detecting position. Aoivd installing it in any area with rains, heavy smoke or oil, or with heavy water vapour.
• To ensure long-term reliability, please clean and maintain the probe surface regularly.
①Insert the flat blade of a small screwdriver into the pry-off
slot of transmitter, twist the blade to remove the cover.
Trigger ModeClarication
Close Deactivated when triggered
Instant Activated when ARM/HOME ARM
24 HoursActivated even when DISARM
Home Deactivated when DISARM/HOME ARM
Door ChimeNo alarm but clanking
Delay Wait few seconds before alarm
②Replace with 1xAAA battery.
12
LED Indicator
Transmitter
Probe
Connecting Line
Produktspecifikationer
| Varumärke: | Iget |
| Kategori: | Detektor |
| Modell: | M3P9 |
Behöver du hjälp?
Om du behöver hjälp med Iget M3P9 ställ en fråga nedan och andra användare kommer att svara dig