Ignis ADG 121 Bruksanvisning

Ignis Diskmaskin ADG 121

Läs gratis den bruksanvisning för Ignis ADG 121 (8 sidor) i kategorin Diskmaskin. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2.5 recensioner. Har du en fråga om Ignis ADG 121 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

EN -1-

-1-

-1--1-

Chart

CANCEL/OFF BU

CANCEL/OFF BUCANCEL/OFF BUTTON

TTON

TTONTTON

Push this button to switch off the control panel.

If pressed when a program is running it cancels the

program ongoing draining water for 1 minute.

If pressed when the dishwasher is switched off it

drains any possible liquids from dishwasher

(1 minute process).

If the indicator flashes repeatedly, see page 6 -

chapter “What to do if...”.

STSTART/RESUME BUTTON

ART/RESUME BUTTON

ART/RESUME BUTTONART/RESUME BUTTON

Push this button to start the selected program:

the indicator lights up and goes off at the end of the

program. When the door is opened during a

washing cycle, the cycle is temporarily paused:

the Start indicator blinks. To resume the cycle

close the door and push Start button again.

PROGRAM SELE

PROGRAM SELEPROGRAM SELECTION

CTION

CTION CTION

BUTTON

BUTTONBUTTON

Push “Programs” button

(repeatedly) until the indicator

of the required program lights

up (see “Table of programs”

below).

1)1) Program dat

Program dat

Program datProgram data obtained in conformi

a obtained in conformi

a obtained in conformia obtained in conformity with European sta

ty with European sta

ty with European staty with European standard EN 50242, obtained un

ndard EN 50242, obtained un

ndard EN 50242, obtained unndard EN 50242, obtained under normal conditions (wi

der normal conditions (wi

der normal conditions (wider normal conditions (without any options) a

thout any options) a

thout any options) athout any options) and

nd nd may vary depending on

may vary depending on

may vary depending on may vary depending on

conditions. Di

conditions. Diconditions. Differences of up to 20 m

fferences of up to 20 m

fferences of up to 20 mfferences of up to 20 minutes are possibl

inutes are possibl

inutes are possiblinutes are possible with sensor programs a

e with sensor programs a

e with sensor programs ae with sensor programs as a result of the appli

s a result of the appli

s a result of the applis a result of the appliance

ance

anceance’

’

’’s automatic ca

s automatic ca

s automatic cas automatic calibrat

librat

libratlibration s

ion s

ion sion system.

ystem.

ystem.ystem.

2)2) Refer

Refer

ReferReference program fo

ence program fo

ence program foence program for energy lab

r energy lab

r energy labr energy label in complia

el in complia

el in compliael in compliance with EN 50242

nce with EN 50242

nce with EN 50242nce with EN 50242 regulation

regulation

regulation regulations. - Note for

s. - Note for

s. - Note fors. - Note for T

T T

esting Inst

esting Instesting Institutes: for

itutes: for

itutes: foritutes: for detailed inf

detailed inf

detailed inf detailed infor

orormati

mati

matimation on t

on on t

on on ton on the

he he

EN/Standard loading c

EN/Standard loading cEN/Standard loading comparison test and other te

omparison test and other te

omparison test and other teomparison test and other tests, contact the fol

sts, contact the fol

sts, contact the folsts, contact the following address:

lowing address:

lowing address: lowing address: “

“

““contact@

contact@

contact@contact@whirlpool.com

whirlpool.com

whirlpool.comwhirlpool.com”

”

””.

* Po

* Po* Power consumption in: Left-on mode

wer consumption in: Left-on mode

wer consumption in: Left-on modewer consumption in: Left-on mode: 0.70 W / Off-mode: 0.40 W

: 0.70 W / Off-mode: 0.40 W

: 0.70 W / Off-mode: 0.40 W: 0.70 W / Off-mode: 0.40 W

TaTab

bbl

lle

ee o

o of

ff p

p pr

rro

oog

ggr

rra

aam

mms

Deter-

Deter-Deter-

gent

gentgent

Consumption

ConsumptionConsumption

Drying

DryingDrying

Phase

PhasePhase

Programs

ProgramsPrograms Loading instructions

Loading instructions

Loading instructionsLoading instructions

Litres

LitresLitres kWh

kWh

kWhkWh

Minutes

MinutesMinutes

1)1)

Pre-

Pre-Pre-Wash

Wash

WashWash cold

cold

coldcold

Crockery to be washed later. — 5.0 0.02 10 NO

Rapi

RapiRapid

dd 40°C

40°C

40°C40°C

Lightly soiled crockery, with no dried-on food. X 13.0 300.70 NO

Eco

EcoEco

2)2)

50°C

50°C50°C

Normally soiled crockery.

Standard program the most efficient in terms of

its combined energy and water consumption.

X 15.0 1.02 165 Full

Baby Care

Baby CareBaby Care

Program that, combined with the Baby Care

specially designed basket, ensures the best

cleaning results and sanitization of baby

accessories (soother, pacifiers, teats) while

washing also normally or heavily soiled crockery.

X 16.0 1.75 120 Full

Intensi

IntensiIntensive

veve 65°C

65°C

65°C65°C

Recommended program for heavily soiled

crockery, especially suitable for pans and

saucepans.

X 15.0 1.50 140 Full

5019 300 01314

5019 300 013145019 300 01314

BEFORE USING THE APPLIANCE FOR THE

BEFORE USING THE APPLIANCE FOR THE BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULL

FIRST TIME CAREFULL

FIRST TIME CAREFULLFIRST TIME CAREFULLY READ THIS

Y READ THIS

Y READ THIS Y READ THIS

QUICK REFERENCE GUIDE AND THE ASSEMBL

QUICK REFERENCE GUIDE AND THE ASSEMBLQUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!

Y INSTRUCTIONS!

Y INSTRUCTIONS!Y INSTRUCTIONS!

THE CONTROL P

THE CONTROL PTHE CONTROL PANEL OF

ANEL OF

ANEL OF ANEL OF THIS DISHW

THIS DISHW

THIS DISHWTHIS DISHWASHER ACTIV

ASHER ACTIV

ASHER ACTIVASHER ACTIVA

AATES PUSHING ANY

TES PUSHING ANY

TES PUSHING ANY TES PUSHING ANY

BUTTON EXC

BUTTON EXCBUTTON EXCEPT CANCEL/OFF BUTTON.

EPT CANCEL/OFF BUTTON.

EPT CANCEL/OFF BUTTON.EPT CANCEL/OFF BUTTON.

FOR ENERGY SA

FOR ENERGY SAFOR ENERGY SAVING THE CONTROL P

VING THE CONTROL P

VING THE CONTROL PVING THE CONTROL PANEL DEACTIV

ANEL DEACTIV

ANEL DEACTIVANEL DEACTIVA

AATES

TES

TES TES

AUTOMA

AUTOMAAUTOMA

TICALL

TICALLTICALLY AFTER 30 SECONDS

Y AFTER 30 SECONDS

Y AFTER 30 SECONDS Y AFTER 30 SECONDS IF NO CYCLE HAS ST

IF NO CYCLE HAS ST

IF NO CYCLE HAS STIF NO CYCLE HAS STARTED.

ARTED.

ARTED.ARTED.

Quick reference guide

Quick reference guideQuick reference guide

Whirlpool is a registered trademark of Whirlpool USA

Whirlpool is a registered trademark of Whirlpool USAWhirlpool is a registered trademark of Whirlpool USA

EN -2-

-2-

-2--2-

First time use

1- salt reservoir

2- rinse aid dispenser

3- detergent dispenser

4- racks system

5,6,7,8- available functions on the panel

9- filters

10- spray arms

1.1. Ask your water supply company what the water hardness

water hardness

water hardnesswater hardness is... 2.

2.2. ...enter this value on

your dishwasher

Suggestions for detergent use

German

degrees °dH

French

degrees °fH

English

degrees °eH

Water hardness

level

3 first PROGRAM LEDs

lit on the panel

(see table of programs)

P1 P2 P3

Gel or Powder

(rinse aid and

salt)

Tabl et s

0 - 5 0 - 6.30 - 9 Soft 1

go to step 1

(see “Daily

check”)

6 - 10 7 - 12.610 - 18 Medium 2

11 - 15 19 - 27 13.3 - 18.9 Average 3

16 - 21 28 - 37 19.6 - 25.9 Medium-hard 4

if water is

HARD extra salt

needs to be

added

(go to step 1,

“Daily check”)

22 - 28 38 - 50 26.6 - 35 Hard 5

29 - 35 51 - 63 35.7 - 44.1 Very hard 6

36 - 50 64 - 90 44.8 - 62.4 Extremely hard 7

WWater hardness should be set only

ater hardness should be set only

ater hardness should be set only ater hardness should be set only

before the first wash or if water

before the first wash or if water before the first wash or if water

hardness has been changed

hardness has been changedhardness has been changed

Visual indicator

(depending

on the model).

Unscrew cap.

Fill the salt reservoir with water

before the first wash only.

(depending on the model)

The salt level indicator lamp may remain lit

at the end of several wash cycles. If the

water hardness level falls within category

(soft), no salt is required.

Salt indica

Salt indicaSalt indicator on the con

tor on the con

tor on the contor on the control panel

trol panel

trol paneltrol panel Salt indicator on the s

Salt indicator on the s

Salt indicator on the sSalt indicator on the salt reservoir cap

alt reservoir cap

alt reservoir capalt reservoir cap

The indicator lamp lights up when SALT

NEEDS TO BE ADDED.

green: OK.

clear: NEEDS TO

BE ADDED

Daily check

Filling the salt reservoir -

Filling the salt reservoir - Filling the salt reservoir - Dissolve limescale (not necessary if water hardness level is set to “soft”!)

- Press and hold together Pro

Pro

ProProgram

gram

gramgrams

ss and CANCEL/Off

CANCEL/Off

CANCEL/OffCANCEL/Off buttons for minimum 3 seconds.

- Programs LEDs will indicate the water hardness setting.

- Press the Progr

Progr

ProgrProgram

amams

ss button to increase setting (when the level reaches 7, the next key press will set the level back to 1.

- Wait 30 seconds (control panel switches off) or press ST

STSTART/Resume

ART/Resume

ART/ResumeART/Resume button to save setting.

Add salt

Add salt Add salt (never add detergent!)

min. 0.8 kg / max. 1 kg

Water hardness level is factory set

for medium-hard water (level 4).

Even if you use tablets which

include salt functionality, you must

still add regeneration salt since such

detergents are not effective enough

at softening hard water.

At first

At first At first time use,

time use,

time use,time use, the salt

the salt

the salt the salt

reservoir has to be filled

reservoir has to be filled reservoir has to be filled

independently from water

independently from water independently from water

hardness level

hardness level hardness level (see

description below in step 1

“Daily check”).

Screw on the cap.

Salt residual

around the cap

need to be

removed. Some

salt reservoir have

a level indicator

integrated in the

cap (see below

how to check).

Once regeneration salt is added, immedi

Once regeneration salt is added, immediOnce regeneration salt is added, immediately start a wash program

ately start a wash program

ately start a wash programately start a wash program (the “Pre-wash” program alone is not sufficient). Residual saline solution or grains of salt can

lead to deep-down corrosion, irreparably damaging the stainless steel components. The guarantee is not applicable if faults are caused by such circumstances.

How to set water hardness in order to always assure the best cleaning results

How to set water hardness in order to always assure the best cleaning resultsHow to set water hardness in order to always assure the best cleaning results

EN -3-

-3-

-3--3-

Daily check

Check the rinse aid indicator to check the level

into the dispenser.

(depending on the model)

Rinse aid indicator on the control panel

Rinse aid indicator on the control panelRinse aid indicator on the control panel Rinse aid indicator on th

Rinse aid indicator on th

Rinse aid indicator on thRinse aid indicator on the dispenser

e dispenser

e dispensere dispenser

The indicator lamp lights up when RINSE AID NEEDS

TO BE ADDED.

dark: OK. clear: NEEDS TO BE ADDED

Only use rinse aids recommended for use in domestic dishwashers. Immedia

Immedia

ImmediaImmediately

tely

telytely wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of the

appliance.

If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not perfectly dry: increase the dosage by turning the dial to a higher setting (5-6). Plastic dishes have more difficulty

drying and a higher rinse aid setting will not improve the situation.

Detergents with rinse aid incorporated may be effective only with longer programs. In the case of shorter programs, detergent residue may be a problem (if necessary, use powder detergent). Detergents with

rinse aid incorporated tend to form excess suds.

Daily use

Adding detergent -

Adding detergent - Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations

Open the cover A

(press the dedicated button).

Only fill the

detergent dispenser

prior to starting a

wash program.

Shut the cover

by pressing dedicated ribs.

Insert detergent: T

TTablet / powder / liquid

ablet / powder / liquid

ablet / powder / liquidablet / powder / liquid into the big chamber.

Please look for the recommendation of the detergent manufacturer

on the packaging of the detergent product.

Use only one tablet per one cycle, only

placed in detergent dispenser.

All types of tablets can be used, but for

2 in 1 type adding of salt is mandatory.

Some types of tablets may not dissolve

completely during the short cycles

(Rapid, Fragile, Handwash); placing the

tablet on the tub bottom can help

dissolving and washing.

If required,

open the

cover B

(press the

dedicated

button).

Add rinse aid

rinse aid

rinse aidrinse aid

to the max.

line ~150 ml

The rinse aid dosage can be

adjusted to the detergent used.

The lower the setting, the less

rinse aid is dispensed (factory

setting: position 4).

Press the button to open the

cover B. Using a coin or similar

object, turn the arrow to the

desired setting. After adjusting

the rinse aid setting, shut the

cover again.

Visual

indicator

Adding rinse aid

Adding rinse aid Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator

Produktspecifikationer

Varumärke:	Ignis
Kategori:	Diskmaskin
Modell:	ADG 121
Enhetsplacering:	Vrijstaand
Färg på produkten:	Roestvrijstaal
Dörrgångjärn:	Rechts
Inbyggd display:	Ja
Vikt:	88900 g
Bredd:	600 mm
Djup:	665 mm
Höjd:	2010 mm
Nettoskatt:	231 W
Barnlås:	Ja
Ljudnivå:	37 dB
Årlig-energiförbrukning:	145 kWu
Förpackningens vikt:	94000 g
Förpackningens bredd:	615 mm
Djuppackning:	751 mm
Förpackningshöjd:	2087 mm
Energieffektivitetsklass (gammal):	A+++
Frys bruttokapacitet:	154 l
Frys nettokapacitet:	129 l
Fryskapacitet:	16 kg/24u
Husmaterial:	Aluminium, Stainless steel
Dörröppningsriktning utbytbar:	Ja
Kylskåpets nettokapacitet:	220 l
Kylskåp med bruttokapacitet:	230 l
Kylskåp invändig belysning:	Ja
Antal hyllor i kylskåp:	5
Frysläge:	Onder
No Frost (frys):	Ja
Retentionstid vid strömavbrott:	24 uur
Antal fryshyllor:	4
antal stjärnor:	4*
Semesterfunktion:	Ja
Total nettokapacitet:	349 l
Äggställ:	Ja
Flaskställ:	Ja
Automatisk avfrostning (kylskåp):	Ja
Total bruttokapacitet:	384 l
Hyllmaterial:	Gehard glas
Supercool funktion:	Ja
Larm för öppen dörr:	Ja
Energianvändning per dag:	0.395 kWh/24u
Nuvarande:	1.4 A
Klimaatklasse:	SN-T
Automatisk avfrostning (frys):	Ja
Frys invändig belysning:	Ja
Luftfilter:	Ja
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50 Hz
Hjulhjul:	Ja
Iskubshållare:	Ja