IHome iBTB2 Bruksanvisning
IHome
Inte kategoriserad
iBTB2
Läs gratis den bruksanvisning för IHome iBTB2 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 13.5 recensioner. Har du en fråga om IHome iBTB2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
resetusb
iBTB2
QUICK START GUIDE
CHARGE BEFORE USE
DOUBLE WALL INSULATED
STAINLESS STEEL BOTTLE
+ REMOVABLE WATERPROOF
BLUETOOTH SPEAKER
CONTROLS & INDICATORS
BACK:
Waterproof Cover
Power
Button
USB Charge Port
Reset Port
Bluetooth
Button
FRONT: Play/Pause
Button
Charge/Battery
Indicator: Green = charged
CHARGE
SPEAKER
BEFORE USE
Connect included USB cable to USB Charging
Port (under waterproof cover) and to
USB power source such as USB AC adapter
connected to working outlet
Red = charging
GETTING STARTED
resetusb
Battery LED
Indicator
Bluetooth LED
Indicator
Bluetooth
Indicator: Slow blink
= auto-link
Solid
= paired
Fast blink
= pairing
PAIRING BLUETOOTH
Pairing the First Time
Manual Pairing
iHome
iBTB2
•Make your Bluetooth device “discoverable”
•Press and hold the Power Button on back of speaker
for 3 sec. to power ON.
•The first time the unit is powered on it will
enter auto-pairing mode.
•Select “iHome iBTB2” on your device’s
Bluetooth menu to complete pairing.
•To manually pair, power speaker ON. Press and hold
Bluetooth Button for 2 seconds, then select “iHome iBTB2”
on your device’s Bluetooth menu to complete pairing.
3s 2s
3s
PLAYING BLUETOOTH AUDIO
SPEAKERPHONE
• Press Play/Pause Button
to play or pause Bluetooth audio.
• Press 2x to skip to next song
• Press 3x to skip to previous track
OR start of currrent track
• Press and hold the Power Button
for 3 sec. to power OFF.
•Speaker must be ON and paired to
Bluetooth device to use speakerphone.
• Press Play/Pause Button to answer/end call
• Press and hold Play/Pause Button
for 2 seconds to decline call
2s
HOW TO USE BOTTLE & SPEAKER
• The Bottle and Speaker
can be unscrewed
to use separately
• Screw the speaker base
to bottom of bottle
for best stability when
using separately
• Speaker is waterproof
(keep cover closed near water)
• See Bottle Cautions
for best experience
• Unscrew cap to fill bottle
Cap
Bottle
Speaker
Base
iHome
iBTB2
TIP: on some iOS (Apple) devices; you can view the iBTB2 battery status on your
device's screen. When device is paired and connected; look for a vertical battery
icon next to the Bluetooth icon on the upper right corner of the device's screen.
Bluetooth is a registered trademarks of Bluetooth SIG Inc.
Bluetooth technology is incorporated under license from Bluetooth SIG Inc.
• Wash with warm water, mild dish soap and rinse the
bottle thoroughly prior to first use and after each use
• Remove bottle cap and thoroughly wash the removable
silicone cap collar after each use
•Do not microwave or place in freezer
•Caution: Hot beverages will remain hot for several hours
•DO NOT overfill
•DO NOT use with alcoholic or carbonated liquids that can
cause pressure build up and potential lid failure
•Always be certain the lid is securely attached to bottle
before using it
•The unit is IP67 waterproof rated, meaning it is immersible for
up to 30 minutes at a depth of 1 meter (3 feet). It will typically
withstand rain, snow and being submersed in shallow water.
Longer duration or deeper immersion that exceeds the tested
limits may cause product failure and void the warranty.
•DO NOT immerse the unit in water for extended periods.
•DO NOT immerse the unit in water deeper than 1 meter
(about 3 feet).
•Make sure cover and surrounding surfaces are completely dry
before opening cover to prevent moisture from damaging
the internal electronics.
•Keep rubber cover free of dirt, sand, or other objects that can
interfere with proper sealing. If for any reason the waterproof cover
is not making a tight waterproof seal water may enter the unit.
•Rinse with tap water after immersion in salt water or swimming pool.
•DO NOT clean unit with oily soaps or use chemicals or solvents.
Clean with damp cloth.
ready
for
water
not
ready for
water
•For proper waterproof operation, make sure the waterproof
cover on the back of the unit is completely flush with
the unit by pressing along the entire edge of the cover
until it is completely and securely in place.
BOTTLE CAUTIONS
RESETTING UNIT
WATERPROOF OPERATION
IMPORTANT INFORMATION ABOUT WATERPROOF OPERATION
Contact Us: 1•800• 288•2792 For warranty visit:
www.ihome.com/support
• If unit doesn’t respond during use, insert the end of a paper
clip or similar into the Reset Port located under the
waterproof cover. Doing so will clear all previous settings
(Bluetooth devices will need to be re-paired). Power unit on
to resume normal operation.
Produktspecifikationer
| Varumärke: | IHome |
| Kategori: | Inte kategoriserad |
| Modell: | iBTB2 |
Behöver du hjälp?
Om du behöver hjälp med IHome iBTB2 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad IHome Manualer
26 Mars 2025
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Inte kategoriserad Manualer
- Trekstor
- Chuango
- August
- Lastolite
- Ambient
- Stannah
- Allnet
- AeroCool
- Orima
- Flavel
- Ices
- SE Electronics
- Buffalo
- DutchOne
- Telefunken
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025