ILive IAT151 Bruksanvisning

ILive Lättnad IAT151

Läs gratis den bruksanvisning för ILive IAT151 (2 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 14.5 recensioner. Har du en fråga om ILive IAT151 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
LED Light Strip
Users Guide for Model IAT151 v2799-01
Back of TV or Monitor
Fold at corners as shown.
Features
Length: 15 ft/4.5M
Width: .4 in/10mm
90 LEDs total (5050 RGB LED)
5V USB power input
Self adhesive, double sided backing
Includes
USB cable with built-in remote receiver
Remote control with CR 2025 battery included
Installation
1. Clean the surface to which you’re going to attach the light strip. The example shown below represents the
back of a TV or computer monitor.
2. Peel the backing strip o the adhesive tape on the LED strip.
3. Press and hold the LED strip to the surface.
4. Connect the USB cable to a USB port on the TV or monitor, or a USB power adapter (not Included).
5. Use the remote to change LED color, brightness, and ash settings.
The remote receiver does not need to be visible or have direct line of sight with the remote, and can be
fully hidden behind your TV, monitor, etc.
You may cut the strip to t smaller areas. Using scissors, cut on the visible line between LEDs.
Connect USB plug
to an available USB
outlet or a USB power
adapter (not included)
The remote receiver is built
into the USB power cable.


Produktspecifikationer

Varumärke: ILive
Kategori: Lättnad
Modell: IAT151

Behöver du hjälp?

Om du behöver hjälp med ILive IAT151 ställ en fråga nedan och andra användare kommer att svara dig