Inkbird IBS-M1 Bruksanvisning
Inkbird
Smarth hem
IBS-M1
Läs gratis den bruksanvisning för Inkbird IBS-M1 (2 sidor) i kategorin Smarth hem. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 12 recensioner. Har du en fråga om Inkbird IBS-M1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Inkbird IBS-M1
Wi-Fi Gateway
Introduction
01
Product Features
02
The Wi-Fi Gateway can be used in
conjunction with relevant Bluetooth
thermometers and hygrometers or Wireless
thermometers and hygrometers to help
those equipment to connect to the server
through Wi-Fi. Download and install Inkbird
Pro app for free, then all connected
equipment can be controlled on your phone.
Part of Bluetooth Connection Equipment
Models: IBS-TH1, IBS-TH1 Mini,
IBS-TH1 Plus, IBS-P01B
Part of Wireless Connection Equipment
Models: ITH-20R-O, IBS-P01R-O
Note: Maximum 4 equipment at one time.
Input Voltage: DC 5V, 1000mA
Maximum Bluetooth Connection Distance:
98ft(the distance will be shorter if there are
interferences)
Wireless transmission frequency: 433Mhz
Maximum Wireless Connection Distance:
300ft(the distance will be shorter if there
are interferences)
Maximum 4 equipment at one time
Warranty: 1 year
Wi-Fi Connection
03
3.1 Get a free app for your phone
Get the Inkbird Pro app or IBS-M1 app from
Google Play or App Store for free, or you can
scan the QR code to download the app you
want directly.
●
●
●
●
●
●
Inkbird Pro enables you to control more than
one Inkbird product on your phone, including
but not limited to IBS-M1 Wi-Fi Gateway.
IBS-M1 app is specially built for IBS-M1
Wi-Fi Gateway.
You could control the IBS-M1 Wi-Fi Gateway
on your phone with either of them, just
choose an app according to your needs.
3.2 Connect to your phone
1. Register before using the Inkbird Pro app.
Select your Country/Region, enter your
phone number or e-mail, then a verification
code will be sent to you, enter it to confirm
your identity and the registration is done.
2. Open the app and click “+” to start the
connection.
3. Plug in the Inkbird Wi-Fi Gateway, the
Wi-Fi button will flash rapidly by default,
confirm it on your app when promoted, then
enter your Wi-Fi password to connect to
wireless network, click OK to connect the
device.
4. Connection succeed.
Note: Please skip Section 3.3 if you have
already connected your Wi-Fi gateway to
the Wi-Fi network successfully, the Section
3.3 is prepared for customers who have
special needs or can not connect their Wi-Fi
gateway in this mode.
3.3 Connect the device in AP mode
If the Wi-Fi gateway is not connected to your
phone, the light of Wi-Fi button will flash
rapidly by default. Press and hold the button
for about 5 seconds to switch to AP mode,
the light of Wi-Fi button will flash slowly in
the mode 5 seconds later.
1. Open the app and click “+” to start the
connection.
2. Plug in the Inkbird Wi-Fi Gateway, choose
the IBS-M1 Wi-Fi gateway , click “AP Mode”
of the right top corner, check if the light of
Wi-Fi button is blinking slowly and confirm
on your app if it is, then enter your Wi-Fi
password to connect to wireless network,
click OK to connect the device.
3. The app will redirect to your phone’s
WLAN Setting interface, select the
“SmartLife-XXXX” to directly connect to the
router without typing in password. Go back
to the app and enter the automatic
connection interface to click “Done”.
4. Connection succeed.
3.4 Wi-Fi Reset
Press and hold the “Wi-Fi” button for 5
seconds to reset the Wi-Fi, then repeat the
steps above to connect with your phone.
The device only supports 2.4GHz Wi-Fi
router.
IBS-M1
Wi-Fi ButtonReset Button
iOS
Android
Scan QR code to download
Inkbird Pro APP
iOS
Android
Scan QR code to download
IBS-M1 APP
3.5 Main Interface of the IBS-M1 Wi-Fi
Gateway on Inkbird Pro
A. Model of the Wi-Fi Gateway device
B. Connection status
C. Model and the picture of the Sensor 1
D. Instant temperature of the internal probe
E. Instant temperature of the external probe
F. The graph of temperature and humidity
G. Basic information of the Wi-Fi Gateway
device
H. Switchable temperature unit
I. Battery capacity
J. Instant humidity of the internal probe
K. Settings for Sensor 1
G
A
B
H
I
J
K
C
D
E
F
Produktspecifikationer
| Varumärke: | Inkbird |
| Kategori: | Smarth hem |
| Modell: | IBS-M1 |
Behöver du hjälp?
Om du behöver hjälp med Inkbird IBS-M1 ställ en fråga nedan och andra användare kommer att svara dig
Smarth hem Inkbird Manualer
1 September 2024
22 Augusti 2024
24 Juli 2024
Smarth hem Manualer
- Alecto
- Smartwares
- IKEA
- Netatmo
- Schellenberg
- Qnect
- Gardena
- EMOS
- Totolink
- EVOLVEO
- Drayton
- Profile
- Tesla
- Reolink
- Chuango
Nyaste Smarth hem Manualer
29 Mars 2025
29 Mars 2025
29 Mars 2025
27 Mars 2025
18 Mars 2025
18 Mars 2025
12 Mars 2025
26 Februari 2025
19 Februari 2025
18 Februari 2025