Inkbird IHC-200 Bruksanvisning
Inkbird
Luftfuktare
IHC-200
Läs gratis den bruksanvisning för Inkbird IHC-200 (102 sidor) i kategorin Luftfuktare. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 15 recensioner. Har du en fråga om Inkbird IHC-200 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/102
5.1 Key Setting
5.1.1 Factory Reset
Hold the button and turn on the device,
the buzzer will beep shortly to remind the
users that all parameters of the the humidity
probe are restored to factory settings.
5.1.2 Fast Setting
Press the button lightly to enter quick
set-up mode and set the value, the SV
screen will display the current setting value
and keep flashing. Press the button or
the button to change the value, hold the
button or the button to change the value
quickly, press the button again to save
settings and quit the setting mode, the
controller will also save settings and quit
the setting mode if there is no operation for
10 seconds.
5.1.3 Normal Setting
Hold the button for 2 seconds to enter
setting mode when the controller working
normally, the PV screen will display the code
“HS” of the first menu item and the SV
screen will display the corresponding
setting value. Press the button to switch
between menu items, press the button or
the button to change the value, the value
will be saved automatically when you switch
to another menu item by pressing the
button.
Press and hold the button for 2 seconds
to save settings and quit the setting mode,
the controller will also quit the setting mode
and turn to normal working mode if there’s
no operation for 30 seconds.
5.2 Flowchart of the Settings
IHC-200-WIFI
Humidity Controller
(English)
%RH
%RH
SV
PV
5.1 Key Setting
5.1.1 Factory Reset
Hold the button and turn on the device,
the buzzer will beep shortly to remind the
users that all parameters of the the humidity
probe are restored to factory settings.
5.1.2 Fast Setting
Press the button lightly to enter quick
set-up mode and set the value, the SV
screen will display the current setting value
and keep flashing. Press the button or
the button to change the value, hold the
button or the button to change the value
quickly, press the button again to save
settings and quit the setting mode, the
controller will also save settings and quit
the setting mode if there is no operation for
10 seconds.
5.1.3 Normal Setting
Hold the button for 2 seconds to enter
setting mode when the controller working
normally, the PV screen will display the code
“HS” of the first menu item and the SV
screen will display the corresponding
setting value. Press the button to switch
between menu items, press the button or
the button to change the value, the value
will be saved automatically when you switch
to another menu item by pressing the
button.
Press and hold the button for 2 seconds
to save settings and quit the setting mode,
the controller will also quit the setting mode
and turn to normal working mode if there’s
no operation for 30 seconds.
5.2 Flowchart of the Settings
Contents
Introduction01 -------------------04
Product Features02 ---------------05
Specifications03 -----------------05
Wi-Fi Connection04 --------------06
Settings05 ------------------------11
Basic Operations06 ---------------13
Sensor Fault Alarm07 ------------17
Important Safeguards08 ----------17
Warranty09 -----------------------18
5.1 Key Setting
5.1.1 Factory Reset
Hold the button and turn on the device,
the buzzer will beep shortly to remind the
users that all parameters of the the humidity
probe are restored to factory settings.
5.1.2 Fast Setting
Press the button lightly to enter quick
set-up mode and set the value, the SV
screen will display the current setting value
and keep flashing. Press the button or
the button to change the value, hold the
button or the button to change the value
quickly, press the button again to save
settings and quit the setting mode, the
controller will also save settings and quit
the setting mode if there is no operation for
10 seconds.
5.1.3 Normal Setting
Hold the button for 2 seconds to enter
setting mode when the controller working
normally, the PV screen will display the code
“HS” of the first menu item and the SV
screen will display the corresponding
setting value. Press the button to switch
between menu items, press the button or
the button to change the value, the value
will be saved automatically when you switch
to another menu item by pressing the
button.
Press and hold the button for 2 seconds
to save settings and quit the setting mode,
the controller will also quit the setting mode
and turn to normal working mode if there’s
no operation for 30 seconds.
5.2 Flowchart of the Settings
Produktspecifikationer
| Varumärke: | Inkbird |
| Kategori: | Luftfuktare |
| Modell: | IHC-200 |
Behöver du hjälp?
Om du behöver hjälp med Inkbird IHC-200 ställ en fråga nedan och andra användare kommer att svara dig
Luftfuktare Inkbird Manualer
14 Augusti 2024
Luftfuktare Manualer
- Orion
- Prem-i-air
- Ruggard
- Thermaltake
- ResMed
- Gude
- GOTIE
- Wilfa
- Motorola
- Homedics
- Ardes
- Saturn
- Caso
- SPT
- Crane
Nyaste Luftfuktare Manualer
12 September 2025
12 September 2025
11 September 2025
11 September 2025
10 September 2025
10 September 2025
9 September 2025
6 September 2025
6 September 2025
3 September 2025