Insignia NS-PCGV30 Bruksanvisning
Insignia
gamingstol
NS-PCGV30
Läs gratis den bruksanvisning för Insignia NS-PCGV30 (2 sidor) i kategorin gamingstol. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 10.5 recensioner. Har du en fråga om Insignia NS-PCGV30 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
6 Lift the seat bottom (F) and turn it right side up, then align the hole in the riser mechanism (E) with the
center support post (C) and press the seat down until it clicks into place.
7 Attach the left arm (H) and right arm (G) to the seat bottom (F) by using four 1/4" × 1" screws (L) and
tighten the screws fully using the Allen wrench (J).
8 Attach the arms to the seat back (I) with four 1/4" × 1" screws (L) then tighten the screws fully using the
Allen wrench (J).
9 After tightening all screws, cover the screw holes with the arm caps (M).
CAUTION: Make sure that the chair back/seat assembly and chair base are securely connected and that all
bolts are tightened before sitting in the chair.
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
FEATURES
• Seat height adjusts to t your body
• Swivel and tilt mechanism lets you customize the chair to your preferred position
• Sturdy, 5-pointed star base with wheels makes it easy to move around
• Black design with white trim grants a modern, sleek look
• Made with quality materials for dependable stability
QUICK SETUP GUIDE
Essential PC
Gaming Chair
NS-PCGV30
Quick Setup
Guide
Allen
wrench
Wheels (5) Star base Center
support post
Seat bottom
5/16" × 3/4"
screw (4)
Center
post cover
Riser mechanism
Right arm Left arm
Seat back
1/4" × 1"
screw (8)
Arm caps (8)
Spare parts:
5/16" × 3/4" screw
1/4" × 1" screw
Arm cap
ASSEMBLING YOUR CHAIR
1 Turn the star base (B) upside down on carpet or a soft towel.
2 Insert the wheel (A) posts into the holes at the ends of the star base arms until they click into place.
3 Turn the base right side up, then insert the bottom of the center support post (C) into the hole in the center
of the star base (B). Put the center post cover (D) on the center support post (C).
4 Turn the seat bottom (F) upside down and place it on a padded box or small stool to support it.
5 Align the riser mechanism (E) on the bottom of the seat (F) and attach it to the seat with four
5/16" × 3/4"
screws (K). Tighten the screws with the Allen wrench (J).
FRONT
FRONT
Produktspecifikationer
| Varumärke: | Insignia |
| Kategori: | gamingstol |
| Modell: | NS-PCGV30 |
Behöver du hjälp?
Om du behöver hjälp med Insignia NS-PCGV30 ställ en fråga nedan och andra användare kommer att svara dig
gamingstol Insignia Manualer
12 September 2025
gamingstol Manualer
- Cougar
- XPG
- Vorago
- Huzaro
- Gembird
- LC-Power
- AeroCool
- Playseat
- Defender
- Skillkorp
- Razer
- Amstrad
- Game Factor
- IKEA
- Newskill
Nyaste gamingstol Manualer
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
26 September 2025
26 September 2025
20 September 2025
19 September 2025
19 September 2025
18 September 2025
17 September 2025