Integral LED ILRC1224VCV3C3A Bruksanvisning

Integral LED Lättnad ILRC1224VCV3C3A

Läs gratis den bruksanvisning för Integral LED ILRC1224VCV3C3A (2 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 12.5 recensioner. Har du en fråga om Integral LED ILRC1224VCV3C3A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Integral LED RGB Colour Changing Remote Control and Receiver

ILRC1224VCV3F3A/ ILRC1224VCV3C3A

1. Introduction 2. Parameter

Receiver:

• Compatible Remote: M3/M6

• Power Input: DC12V~DC24V

• Max Current Load: Max 3Ax3CH

• Max Output Power: 108W(12V)/216W(24V)

• Gray Scale Level: Max4096×4096×4096

• Working Temp.: -30ºC~55 Cº

• Dimensions: L135×W30×H20(mm)

• Weight (N.W.): 47g

Total Weight (G.W.): 135g

Remote:

• Working Voltage: 3V (battery CR2032)

• Working Frequency: 433.92MHz

• Remote Distance: 40m~50m

• Working Temp.: -20ºC~55 Cº

• Remote Dimensions: L104×W58×H9(mm

• Remote Holder Dimensions:

L108×W63×H14(mm)

• Weight(N.W.): 42g

INTRODUCTION

The Integral LED RGB Colour Changing Remote

Control and Receiver is designed to work with

the Integral LED RGB Colour Strip. You will be

able to change the colour of the strip in dierent

colour modes to change the mood and look of

your space instantly. You can also dim the strip to

your ideal level. The strip can also switch between

dierent colour modes on continuous basis to

add excitement.

Power input socket

Remote ID learning

bu on

Indic or lightat

LED lamp c n socketonneco

RGB V+ RGB control

3. Operating Instruction for Receiver

The Remote control has been matched to the receiver before leaving the factory, if deleted accidentally you can restore the ID as follows.

Learning ID: Short press the ID learning button on the receiver until the indicator light is on, then press any key on the remote control, the indicator

light ashes several times. The ID is now activated.

Cancel ID: Press ID learning button on the receiver for 5 seconds.

One receiver can be matched to up to 10 remote controls.

WARNING

DO NOT CONNECT THE RECEIVER TO A MAINS SUPPLY.

THE RECEIVER MUST ONLY BE CONNECTED TO A SUITABLE 12V/24V LED DRIVER.

IMPORTANT NOTICE

• This product should be installed according to the instructions in this guide

and by a qualied electrical installer.

• All electrical work must be completed in accordance with the latest IET

wiring regulations (formally IEE) for the UK or in accordance with all

applicable regulations and laws in the country in which it is being installed.

• Switch OFF power at the mains before installing the product.

• Always disconnect or switch o the power supply before making any

adjustment to the wiring.

• Observe the operating temperature of the product: -30C to +55C

• Limited 5 Year Warranty. This LED Remote control and Receiver is for

indoor use only. Improper installation, abuse or miss-powering of the

remote control and receiver or failure to use the remote control and

receiver for its intended use will void the warranty. Proof of purchase is

required for all returns. Your statutory rights remain unaected.

Please see www.integral-LED.com/warranty.

Questions? Please contact you supplier or see integral-LED.com

IP00

Integral LED is a division of Integral Memory plc

London NW10 0UF

Produktspecifikationer

Varumärke:	Integral LED
Kategori:	Lättnad
Modell:	ILRC1224VCV3C3A
Vikt:	89 g
Förpackningens bredd:	132 mm
Certifiering:	CE, RoHS\nLVD\nEN-60950-1
Dimbar:	Ja
Produktens färg:	Vit
Låddjup:	22 mm
Vikt inkl. förpackning:	135 g
Antal per förpackning:	1 styck
Temperatur vid drift:	-30 - 55 ° C
AC-inspänning:	12 - 24 V
Material, hölje:	Plast
Strömkälla:	DC
Ström:	9 A
Paketlängd:	200 mm
Maximal styrka:	216 W