Intellinet 506519 Bruksanvisning

Läs gratis den bruksanvisning för Intellinet 506519 (16 sidor) i kategorin Audio/video-omvandlare. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 8.5 recensioner. Har du en fråga om Intellinet 506519 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/16
FAST ETHERNET
MEDIA CONVERTER
INSTRUCTIONS
MODELS 506502, 506519, 507332
INT-506502/506519/507332-UM-ML1-1015-02
Important: Read before use. • Importante: Leer antes de usar.
intellinetnetwork.com
2
ENGLISH
Fast Ethernet Media Converter English
Thank you for purchasing the Intellinet Fast Ethernet Media
Converter. Media converters connect two Ethernet networks over
a longer distance using fiber optic cable.
MODELS
• 506502:
Fast Ethernet Media Converter
10/100Base-TX to 100Base-FX (SC) Multimode, 2 km (1.24 mi.)
•506519:
Fast Ethernet Media Converter
10/100Base-TX to 100Base-FX (ST) Multimode, 2 km (1.24 mi.)
•507332:
Fast Ethernet Single Mode Media Converter
10/100Base-TX to 100Base-FX (SC) Single Mode, 20 km (12.4 mi.)
CONNECTIONS
TwistedPair–RJ45
Connect the UTP port of the media converter to an RJ45 port on
the network; e.g., to an Ethernet switch. Cat5e or better cabling is
recommended.
Fiber Optic
As shown above, two fiber optic cables need to be connected be-
tween two ideally identical media converters. Make a connection
MediaConverter1
MediaConverter2
RJ45
RJ45
TX
TX RX
RX
OPTICAL FIBER
ETHERNET1 ETHERNET2
Twisted Pair
Twisted Pair
ENGLISH 3
from Media Converter 1 TX to Media Converter 2 RX, and from
Media Converter 1 RX to Media Converter 2 TX. Maximum length
and fiber cable specification depend on the model. (See Models.)
POWER
Plug the power adapter into the 5 V DC input jack on the media
converter, then connect it to a regular power outlet. Only use
the included power adapter or one with matching specifications
(output of 5 V DC, at least 1 A).
LEDS
PWR The power adapter is connected when lit.
100M – 100 Mbps link on the twisted pair connection when lit;
10 Mbps link or no link if unlit.
Link/Act(TP=RJ45;FP=Fiber) – Active link when lit; data traffic
when flashing; no active network link when unlit.
FDX/COL(forTP/RJ45) – Full duplex connection when lit; data
collisions when flashing; half duplex when unlit.
SD(forFP/Fiber) – Fiber optic signal is detected when lit; no
signal when unlit.
For specifications, go to intellinetnetwork.com.

Produktspecifikationer

Varumärke: Intellinet
Kategori: Audio/video-omvandlare
Modell: 506519

Behöver du hjälp?

Om du behöver hjälp med Intellinet 506519 ställ en fråga nedan och andra användare kommer att svara dig