Intermatic LC4535LA Bruksanvisning


Läs gratis den bruksanvisning för Intermatic LC4535LA (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3 recensioner. Har du en fråga om Intermatic LC4535LA eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Débrancher l’alimentation au niveau des disjoncteurs ou des sectionneurs avant de procéder à l’installation ou à l’entretien.
Ne PAS utiliser l’état ARRÊT de la commande photo-électronique pour travailler sur le matériel.
Risque d’incendie et d’électrocution
IMPORTANT OPERATING INSTRUCTIONS
1. Disconnect power.
2. Insert the photocontrol prongs into the female socket and twist in clock-wise direction until unit is secure.
3. If necessary, adjust the base so that the photocontrol eye is facing north away from the sun and any artificial light.
4. Reapply Power.
Instructions for Installing LC2100 and LC4500 Series Thermal Photocontrols
Instructions d’installation des photocontrôleurs thermiques des séries LC2100 et LC4500
Desconecte el suministro ectrico de los disyuntores o desconecte los interruptores antes de comenzar la instalación o el mantenimiento.
NO use el estado OFF (Apagado) de los controles fotoeléctricos para realizar mantenimiento del equipo.
Riesgo de incendio o descarga eléctrica
WARNING
Disconnect power at the circuit breaker(s) or disconnect switch(es) before beginning installation or servicing.
Do NOT use the OFF state of the photocontrol for equipment servicing.
Risk of Fire or Electric Shock
INSTRUCTIONS D’UTILISATION IMPORTANTES
1. Débrancher l’alimentation.
2. Insérer les broches de la commande photo-électronique dans la prise femelle et tourner dans le sens horaire jusqu’à
ce que l’unité soit bien fixée.
3. Au besoin, ajuster la base de manière à orienter la commande photo-électronique face au nord, à l’écart du soleil et
de toute lumière artificielle.
4. Rétablir l’alimentation.
INSTRUCCIONES DE OPERACIÓN IMPORTANTES
1. Desconecte la alimentación eléctrica.
2. Inserte las puntas del control fotoeléctrico en el tomacorriente y gírelo hacia la derecha hasta que la unidad quede
firme.
3. En caso necesario, ajuste la base de modo que la mirilla del control fotoeléctrico apunte hacia el norte lejos del sol y
de las luces artificiales.
4. Vuelva a aplicar la alimentación eléctrica.
AVERTISSEMENT
ADVERTENCIA
Neutral/L2
Line/L1
Receptacle
Photocontroller
Black
White
Red
Load
Neutre/L2
Ligne/L1
Prise
Unité de
commande
photo-
électronique
Noir
Blanc
Rouge
Charge
Neutral/L2
Línea/L1
Enchufe
hembra
Control
fotoeléctrico
Negro
Blanco
Rojo
Carga


Produktspecifikationer

Varumärke: Intermatic
Kategori: ej kategoriserat
Modell: LC4535LA

Behöver du hjälp?

Om du behöver hjälp med Intermatic LC4535LA ställ en fråga nedan och andra användare kommer att svara dig