Invicta Bolt 27808 Bruksanvisning

Invicta Klockor Bolt 27808

Läs gratis den bruksanvisning för Invicta Bolt 27808 (6 sidor) i kategorin Klockor. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2.5 recensioner. Har du en fråga om Invicta Bolt 27808 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/6

Movement Caliber : VD53

Presentation

Display Elements

Minutes Hand

Hour Hand

Stopwatch

Minutes Hand

(Move in second

increments)

Second Hand

Stopwatch

Minutes Hand

(Move in second

increments)

24-Hour Hand

(Indicates the time on

a 24-Hour basis)

Date Window

1 2

Crown Positions

1: Date setting

2: Time setting

Push Button B

In stopwatch function:

Split / Split release / Reset

Control Buttons

Push Button A

In stopwatch function:

Start / Stop

· The measurement time indicated by the stopwatch hands move independently of the

center hands.

·Chrono1/10 sec :The stopwatch1/10secondhandmoves forarst minute.Afterone

minute, it indicates the measurement time when it is stopped.

INFO

Movement Caliber

VD53

Movement Caliber : VD53

Setting

Adjusting the Stopwatch Hand Position

Before setting the time, check if all the chronograph hands - second,

minute - are at the “0”(12 o’clock) position.

• If the stopwatch is in use, press the buttons in the following order to

reset it, and then, check if the hands return to “0” position.

 (Fordetails,see“HOWTOUSETHESTOPWATCH”)

• If the chronograph is counting : A > B

• If the stopwatch is stopped : B

• If the split time is displayed: B > A > B

If either of the stopwatch hands are not in the “0” position , reset them

following the procedure below

Pull the crown out to position 2. Push the crown back to the normal position.

PressbuttonAorBtoresetallstopwatch

hands to “0” position.

· The stopwatch minute hand moves

correspondingly with the stopwatch

second hand.

· The hands move quickly if the respective

buttons are kept pressed.

1.2

1.1 1.3

2.3

2.1

2.4

2.2

Movement Caliber : VD53

Setting

Time Setting

• Before setting the time, check that the chronograph measurement

isstopped.

•Donotsetthedatebetween9:00P.M.and1:00A.M,otherwisethe

day may not change properly. If it is necessary to set the date during

 thetimeperiod,rstlychangethetimetoanytimeoutsideit,setthe

date and then reset the correct time.

2.1 Pull out the crown to the position 1

2.2 Turn the crown clockwise until the preview day’s date appears.

2.3 Pull out the crown to the position 2 when the second hand is at the 12 o’clock position.

  Itwillstoponthespot.Setthehandstothedesiredtimeoftheday(makesureAM/PMis

set correctly) by turning the crown.

  • When the crown is at the second click position, do not press any button. Otherwise the

chronograph hands will move.

2.4 Push the crown back in the normal position in accordance with a time signal.

Produktspecifikationer

Varumärke:	Invicta
Kategori:	Klockor
Modell:	Bolt 27808
Färg på produkten:	Zwart, zilver
Inbyggd display:	Ja
Vikt:	2000 g
Bredd:	113 mm
Djup:	180 mm
Höjd:	104.5 mm
Snäll:	Vaste streepjescodelezer
Husmaterial:	Aluminium
Internationell säkerhetskod (IP):	IP64
LED-indikatorer:	Ja
Anslutningsteknik:	Bedraad
Typ av strömkälla:	DC
Certifiering:	IEC, EN, CDRH
Bildsensortyp:	Laser
Displayteknik:	LCD
Inspänning:	15 - 30 V
Förvaringstemperatur:	-20 - 70 °C
Våglängd:	680 nm
Streckkoder som stöds (1D):	Codabar, Code 128, Code 39, Code 93, GS1-128 (UCC/EAN-128), Pharmacode, U.P.C.
Standardgränssnitt:	RS-232, RS-485
Strömförbrukning (typiskt):	15 W
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	0 - 90 procent
2D (matris och staplade) streckkoder stöds:	Niet ondersteund
Läshastighet (max):	1200 lezingen/s