IOptron ICam 464C Bruksanvisning
Läs gratis den bruksanvisning för IOptron ICam 464C (7 sidor) i kategorin Kamera. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 8.5 recensioner. Har du en fråga om IOptron ICam 464C eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
iOptron Corporation 6E Gill Street, Woburn, MA 01801 |
iOptron Planetary Camera Manual
iCAM464C
Product # 3373
Ver. 1.00 2021.12
iOptron reserves the rights to revise this instruction without notice. Actual color/contents/design/function of a product may dier
from those described in this instruction manual.
2
Product Descripon
iCAM464C camera uses a Sony IMX464 color sensor. The imaging area is 1/1 9um pixel size, .8”, with 2.
4.2MP resoluon (2712*1538) and diagonal of 9mm.
iCAM464C camera has a very high sensivity. It is an idea camera for planetary imaging. The camera has
a very low readout noise. The tesng results indicated that the readout noise is as low as 0.75e at a gain
of 350 and around 0.71e at a gain of 400 The camera has a unique DPS (Dead Pixel Suppression) .
technology to eliminate the any abnormal/dead pixel by analyzing camera dark frames. The camera has
a unique HCG mode, which will automacally turn on when the camera gain seng is 80. The HCG ≥
mode can greatly reduce the readout noise and retain the same high dynamic range as it at low gain.
Due to its unique QE response, the sensivity reaches the ak at 800-850nm. An IR850 or CH4 lter can pe
be used with the camera for infrared imaging.
When the camera is connected to the USB3.0 interface and full-resoluon preview is used, it can reach
93 fps in RAW8 mode (10bit ADC). During image recording, the actual recording speed is aected by the
hard drive wring speed. It is recommended to use a high-quality solid state drive to record data to
realize the full benet of the USB3.0 data speed. The ST-4 guiding port allows one to connect the camera
to a mount GUIDE port for ST-4 autoguiding.
Package Contents
iCAM Camera 464C
USB 3.0 cable
ST-4 guiding cable
Online Contents
This Manual
Camera driver
ASCOM driver
System Requirement
Windows 7/8/10 is supported
Linux and Mac OS will be supported soon.
Driver Installaon
1. Download iCAM/PlayerOne camera driver. Save in a folder or desktop.
2. DO NOT connect the camera to the computer yet. Double click on downloaded driver to
enter installaon page.
3
3. Check and click License Agreement Install.
4. Check and click . Always Trust Soware from PlayerOne Install
5. Click when it is down. Install Finished
6. Now connect the camera to a computer using included USB 3.0 cable. Check iCAM status in
Device Manager Imaging devices under .
Produktspecifikationer
| Varumärke: | IOptron |
| Kategori: | Kamera |
| Modell: | ICam 464C |
Behöver du hjälp?
Om du behöver hjälp med IOptron ICam 464C ställ en fråga nedan och andra användare kommer att svara dig
Kamera IOptron Manualer
26 December 2024
26 December 2024
20 September 2024
20 September 2024
Kamera Manualer
- Silvergear
- Azden
- Casio
- UniView
- VTech
- Lexibook
- Cosina
- Vemer
- SJCAM
- Medion
- Alfatron
- Netgear
- Spypoint
- Vimar
- Meade
Nyaste Kamera Manualer
9 April 2025
9 April 2025
3 April 2025
3 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025
27 Mars 2025
27 Mars 2025
27 Mars 2025