IPEGA PG-XBX026A Bruksanvisning
Läs gratis den bruksanvisning för IPEGA PG-XBX026A (1 sidor) i kategorin konsol. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3.5 recensioner. Har du en fråga om IPEGA PG-XBX026A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
PWM COOLING FAN
Instruction Manual (PG-XBX026A)
1. Working Voltage: DC 5V
2. Working Current: Fan ≤ 500 mA
3. Applicable platform: XBX console
Headphone holder
Function illustration:
Electrical parameters:
Cooling Fan Level Indicator
Intelligent Temperature
Control Indicator
RGB Lighting on/off
USB extension port
Cooling Fan on/off
Power cable
1. This product is suitable for cooling the XBX console
2. Temperature detection functionality and can intelligently adjust the cooling fan speed based on
the temperature changes of the console in automatic mode. The cooling fan can also be
manually adjusted to operate at three different speeds using the fan switch.
3. Headphone holder for convenient storage of headphones.
4. With RGB light effect, equipped with a light control switch that can toggle the fan's colorful
lighting effects on and off.
1. Align the fan with the holes on the top of the XBX console and insert it. Then insert the
headphone hook into the two groove slots on the fan, as shown in the figure above (Figure 1).
2. Plug the USB power cable of the fan into the USB port on the XBX console, as shown in the
figure above (Figure 2).
3. Turn on the XBX console, and the four central LED lights on the top fan will light up, creating a
colorful background lighting effect. After 8 seconds, it will automatically enter the default
intelligent temperature control mode, indicated by a steady green light for AUTO.
4. The "Fan Speed Switch" button can control the fan between different modes: intelligent
temperature control mode (AUTO), 1st gear (1300±10% RPM), 2nd gear (1500±10% RPM),
3rd gear (1800±10% RPM), and Off. It also has a fan speed memory function. Press and hold
the button for 3 seconds to turn off the fan, and press it again to restore the fan speed to the
previous setting.
5. When the fan is in "Intelligent Temperature Control Mode" (AUTO), the fan speed depends on
the temperature detected by the temperature sensor inside the fan that is in contact with the
console. The higher the temperature, the faster the fan speed (up to a maximum of 1800±10%
RPM). When entering the "Intelligent Temperature Control Mode," the fan will rotate for 5
seconds regardless of the temperature, and then it will automatically adjust the fan speed
based on the temperature: below 38 degrees Celsius, the fan will not rotate; around 38
degrees Celsius: 1300±10% RPM; around 40 degrees Celsius: 1500±10% RPM; above 42
degrees Celsius: 1800±10% RPM.
Fan component x 1 Headphone holder x 1 Manual x 1
Figure 1 Figure 2
1. Please do not store this product in wet or high-temperature areas.
2. Don’t knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary damage
to the product.
3. Non professional personnel should not disassemble the product, otherwise it will not be
covered in the after-sales warranty service.
4. This product contains electronic components such as capacitors and should not be casually
discarded. Please dispose of it properly by giving it to qualified recycling facilities.
5. In the event that some products cannot be connected or operated due to uncontrollable factors,
our company accepts no responsibility. Our company reserves the right to make the final
interpretation in such cases.
6. This product does not have short circuit protection, overvoltage protection, or overcurrent
protection. Please do not use it to charge batteries or controllers of other models.
6. The USB expansion port on the top fan supports USB 2.0 data transmission and provides a
current output of 500mA, which can be used for charging the XBX controller while playing.
7. This product is equipped with a light control switch that can toggle the fan's colorful lighting
effects on and off.
XBX智能温控风扇
产品说明书( )PG-XBX026A
1.工作电压：DC 5V
2.工作电流：风扇≤500mA
3.适用平台：XBX主机
耳机挂钩
风扇档位指示灯
智能恒温指示灯
灯效开/关
扩展USB接口
风扇档位开/关
电源连接线
1. 本产品可供XBX主机散热，产品设计巧妙，完美贴合XBX主机。
2. 本产品有3档风速可控制，可自动或手动控制风扇转速，具备温度检测功能，可根据主机温度
变化自动智能调整散热风扇转速。
3. 配备一个耳机挂件，方便耳机收纳。
4. 带有RGB灯效，灯光控制开关，可切换炫彩灯光的开与关。
1. 将风扇对准XBX主机上面的孔位插入，然后将耳机挂钩插在风扇上面的两个凹槽孔位，如上图1，
2. 将风扇的USB电源连接线插入到XBX主机USB接口，如上图2。
3. 开启XBX主机，顶置风扇中部的4个幻彩LED灯会亮起，使风扇发出幻彩背景灯效8s后自动默认
进入智能温控模式，对应的AUTO灯光常亮绿色。
4. “风扇档位切换键”可控制风扇在智能温控模式（AUTO）、1档（1300±10%转）、
2档（1500±10%转）、3档（1800±10%转）、停转、五种状态之间依次切换且具有风扇
档位记忆功能，长按3s关闭风扇，再按一下默认为上一次的风扇档位。
5. 当风扇处于“智能温控模式”时，风扇转速依赖于风扇伸入主机的温度感应金属头的温度值，
当温度越高时，风扇转速越快（最高1800±10%转）; 刚进入“智能温控模式”时，不论温度
多少，风扇会自转5秒，然后根据温度感应金属头的温度自动智能调整工作状态：温度<38度
时不转，温度38度左右：1300±10%转，温度40度左右：1500±10%转，温度>42度：
1800±10%转。
6. 顶置风扇USB扩展口具备USB2.0数据传输功能及500毫安的电流输出，用于XBX手柄边充边玩。
7. 本产品配备灯光控制开关，可切换风扇炫彩灯光的开与关。
风扇x1 耳机挂钩x1 说明书x1
图1 图2
1. 请不要把本产品在潮湿或高温地方存储。
2. 请不要敲击、摔打、刺穿、或试图去分解本产品，以免对产品造成不必要的损害。
3. ,非专业人员误拆卸本产品 否则不在售后保修服务内。
4. 产品内有电容等电子材料，不可随便丢弃，须集中给有资质的回收机构。
5. 因不可抗拒的因素造成部分产品无法连接操作，我公司不负任何责任，对此我公司保留最终解释权。
6. 本产品无短路保护，无过压保护，无过流保护，请勿用于其他型号充电电池或手柄充电。
Usage instructions:
Note:
Product list:
Usage instructions:
Produktspecifikationer
| Varumärke: | IPEGA |
| Kategori: | konsol |
| Modell: | PG-XBX026A |
Behöver du hjälp?
Om du behöver hjälp med IPEGA PG-XBX026A ställ en fråga nedan och andra användare kommer att svara dig
konsol IPEGA Manualer
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
9 Oktober 2025
9 Oktober 2025
konsol Manualer
Nyaste konsol Manualer
5 Oktober 2025
4 Oktober 2025
26 September 2025
26 September 2025
25 September 2025
25 September 2025
31 Augusti 2025
13 Augusti 2025
3 Augusti 2025