Janome 1100D Bruksanvisning
Läs gratis den bruksanvisning för Janome 1100D (26 sidor) i kategorin Symaskin. Guiden har ansetts hjälpsam av 31 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 16 recensioner. Har du en fråga om Janome 1100D eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/26
1
TO CHANGE THE FRONT FLAP (LOOPER COVER) AND BASE COVER................................2
TO CHANGE THE BACK COVER AND LEFT FRONT COVER..................................................3
TO CHANGE THE FRONT COVER AND INSIDE COVER..........................................................4
GAUGE FOR MECHANICAL ADJUSTMENT..............................................................................5
TO ADJUST THE HEIGHT AND ORIENTATION OF THE NEEDLE BAR...................................6
TO ADJUST THE HEIGHT OF THE PRESSER FOOT................................................................7
TO ADJUST THE CLEARANCEBETWEEN THE FEED DOG AND NEEDLE PLATE.................8
TO ADJUST THE HEIGHT OF THE FEED DOG.........................................................................9
TO ADJUST THE TIMING AND HEIGHT OF THE MOVING BLADE (UPPER KNIFE)..............10
TO ADJUST THE HORIZONTAL FEED TIMING.......................................................................11
TO ADJUST THE LOWER LOOPER TIMNG.............................................................................12
TO ADJUST THE CLEARANCE AND TIMING OF THE LOWER LOOER.................................13
TO ADJUST THE THE CLEARANCE BETWEEN THE NEEDLE GUARD AND NEEDLES......14
TO ADJUST THE POSITION OF THE UPPER LOOPER..........................................................15
TO ADJUST THE CLEARANCE AND TIMING OF
THE UPPER LOOPER AND LOWER LOOPER........................................................................16
TO ADJUST THE LOER LOOPER THREAD GUIDE.................................................................17
TO ADJUST THE HEIGHT OF THE UPPER LOOPER TAKE UP LEVER.................................18
TO ADJUST THE DEFFERENTIAL FEED.................................................................................19
TO ADJUST THE CUTTING WIDTH.........................................................................................20
TO ADJUST THE TENSION UNIT.............................................................................................21
TO ADJUST THE THE PROGRAM DISPLAY...........................................................................22
TO ADJUST THE MOTOR BELT TENSION.............................................................................23
TO CHANGE THE MOTOR.......................................................................................................24
TO CHANGE THE WIRED TB/SW UNIT...................................................................................25
PARTS LIST..............................................................................................................................26
TABLE OF CONTENTS
2
TO CHANGE THE FRONT FLAP (LOOPER COVER)
AND BASE COVER
1. Remove the setscrews A and remove the FRONT FLAP (looper cover).
2. Remove the setscrews B and remove the base cover.
MODEL 1100D
To remove:
+
A
+
A
A
B
To attach:
3. Follow the above procedure in reverse.
Produktspecifikationer
| Varumärke: | Janome |
| Kategori: | Symaskin |
| Modell: | 1100D |
Behöver du hjälp?
Om du behöver hjälp med Janome 1100D ställ en fråga nedan och andra användare kommer att svara dig
Symaskin Janome Manualer
12 September 2025
12 September 2025
19 Juli 2025
31 Maj 2025
5 Mars 2025
25 Februari 2025
25 Februari 2025
25 Februari 2025
25 Februari 2025
21 Oktober 2024
Symaskin Manualer
- Aigger
- Kenmore
- Bestron
- Singer
- Vendomatic
- Baby Lock
- Jata
- Solac
- Durkopp Adler
- Anker-Bernette
- Mellerware
- SteamMax
- Bernina
- Essentiel B
- Empisal
Nyaste Symaskin Manualer
17 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025