Janome 2206 Bruksanvisning

Janome Symaskin 2206

Läs gratis den bruksanvisning för Janome 2206 (25 sidor) i kategorin Symaskin. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Janome 2206 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/25

SERVICING MANUAL

2206 & 2212

CONTENTS

WHAT TO DO WHEN ............................................................................................ 1~3

SERVICE ACCESS

FACE COVER ...................................................................................... 4

FRONT COVER.................................................................................... 5

REAR COVER ...................................................................................... 6

MECHANICAL ADJUSTMENT

TOP TENSION ..................................................................................... 7

BOBBIN TENSION ............................................................................... 8

PRESSER BAR HEIGHT ALIGNMENT................................................ 9

NEEDLE SWING .................................................................................. 10

NEEDLE DROP .................................................................................... 11

CLEARANCE BETWEEN NEEDLE AND HOOK (NO.1) ...................... 12

CLEARANCE BETWEEN NEEDLE AND HOOK (NO.2) ...................... 13

FEED DOG HEIGHT ............................................................................ 14

NEEDLE BAR HEIGHT ........................................................................ 15

NEEDLE TIMING TO SHUTTLE .......................................................... 16

BUTTONHOLE FEED BALANCE ......................................................... 17

FEED BALANCE ON STRETCHSTITCH ............................................. 18

BARTACK FEED OF BUTTONHOLE................................................... 19

DISENGAGEMENT OF CAM FOLLOWER .......................................... 20

MOTOR BELT TENSION ..................................................................... 21

WIRING .............................................................................................................. 22

OILING .............................................................................................................. 23

TROUBLESHOOTING

PROBLEM CAUSE REMEDY REFERENCE

1. Skipping 1. Needle is not inserted Insert the needle properly.

stitches properly.

2. Needle is bent or worn. Change the needle.

3. Incorrectly threaded Rethread.

4. Needle or thread are Use the recommended sewing

inappropriate for fabric being needle and thread.

sewn.

5. Sewing on stretch fabric Use A #11 blue tip needle.

6. Inappropriate needle bar See mechanical adjustment P. 15

height “Needle bar height.”

7. Inappropriate needle to hook See mechanical adjustment P. 16

timing “Needle timing to shuttle.”

8. Inappropriate needle to hook See mechanical adjustment P. 12, 13

clearance “Clearance between needle and

hook.”

2. Fabric not 1. Incorrect feed dog height See mechanical adjustment P. 14

moving “Feed dog height.”

2. Thread on bottom side of Make sure to bring both needle

fabric is jammed up. and bobbin thread under the foot

when starting sewing.

3. Feed dog teeth are worn. Change the feed dog.

Produktspecifikationer

Varumärke:	Janome
Kategori:	Symaskin
Modell:	2206
Vikt:	110 g
Bredd:	50.8 mm
Djup:	76.2 mm
Höjd:	24 mm
Hållbarhetscertifikat:	RoHS
Antal per paket:	120 stuk(s)
Inspänning:	80 - 264 V
Uteffekt:	65 W
Utström:	8 A