Janome Magnolia 7318 Bruksanvisning

Janome Symaskin Magnolia 7318

Läs gratis den bruksanvisning för Janome Magnolia 7318 (19 sidor) i kategorin Symaskin. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 4 recensioner. Har du en fråga om Janome Magnolia 7318 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/19
SERVICE MANUAL
Model 7318
INDEX
Service Access (1) Face plate..................................................................................... 1
Service Access (2) Base cover ................................................................................... 2
Service Access (3) Front cover ................................................................................... 3
Service Access (4) Rear cover .................................................................................... 4
Adjusting Thread Tension ............................................................................................ 5
Adjusting Presser Foot Height and Alignment............................................................. 6
Adjusting Needle Swing .............................................................................................. 7
Adjusting Needle Drop Position.... .............................................................................. 8
Adjusting Needle to Hook Timing ................................................................................ 9
Adjusting Needle Bar Height ..................................................................................... 10
Adjusting Clearance between Needle and Hook Point ..............................................11
Adjusting Backlash between Hook Drive Gear and Lower Shaft Gear ..................... 12
Adjusting Feed Dog Height ....................................................................................... 13
Adjusting Feed Balance ............................................................................................ 14
Adjusting Buttonhole Feed Balance .......................................................................... 15
Adjusting Buttonhole Zero Feed................................................................................ 16
Replacing Motor and Adjusting Motor Belt Tension................................................... 17
PARTS LIST ......................................................................................................... 18-39
1
MODEL 7318
Setscrew
Face plate
Service Access (1)
Cap
• Face plate
<To remove>
Remove the cap and setscrew. Remove the face plate.
<To attach>
Attach the face plate with the setscrew. attach the cap.

Produktspecifikationer

Varumärke: Janome
Kategori: Symaskin
Modell: Magnolia 7318

Behöver du hjälp?

Om du behöver hjälp med Janome Magnolia 7318 ställ en fråga nedan och andra användare kommer att svara dig