JBL AW526 Bruksanvisning

JBL högtalare AW526

Läs gratis den bruksanvisning för JBL AW526 (1 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2.5 recensioner. Har du en fråga om JBL AW526 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

MTU-200, MT200-BK, MTU-500 & MTU-500-BK

U-Bracket Instructions

For All Weather Series Loudspeakers

Use the MTU-200 U-bracket to mount the AW266 or AW295, and MT500 U-bracket to mount the AW566, AW595 or

AW526 to walls, decks, or ceilings.

Read and follow these instructions carefully before beginning.

Installing speakers must be performed by experienced professionals. If you have any doubts about the integrity of the

structure you are mounting to or you are not sure about the proper hardware or method to use, consult a structural

engineer.

Bracket Kit Hardware Includes: (1) U-Bracket, (4) Friction Washers, (2) Bracket Washers, (2) M10 x 1.5mm x

35mm Bolts, and (2) M6 1mm x 35mm Bolts.

CAUTION:

Due to the wide variety of building structures, materials and mounting methods, these instructions assume that the

installing contractor/installer will exercise good judgment in selecting the proper mounting area and hardware.

As a guide, the installation, when complete, should be capable of supporting at least 5 times the actual load.

Step 1 – Install the Bracket Securely to Building Structure

Select the mounting area where the speaker will be positioned. Be sure there is adequate structural strength for

mounting, such as a stud. Do not rely on drywall, acoustic tiles, etc. to support the weight of the speaker. Follow

building code requirements to safely install the bracket to the building structure. Select the proper mounting hardware

for the structure and attach with at least four fasteners (two per side). If in doubt, consult a fastener specialist. Tighten

all hardware permanently.

Step 2 – Install Speaker into Bracket

Position the speaker in between the bracket arms and install the included hardware into the speaker cabinets

threaded holes. Be sure to place the friction washers between the speaker and the bracket arms and between the

bracket washer and the bracket arms then tighten the bolts loosely, not tight.

Step 3 – Wire and Aim the Speaker

Rotate the speaker until it is aimed in the desired direction and tighten the M10 mounting bolts permanently. Secure

the desired aiming angle by tightening the M6 bolts. Warning: Do not over tighten M10 and M6 bolts.

Step 4 – Safety Cable

It is strongly recommended that the speaker be secured to the mounting structure with a properly rated safety cable

attached to an M10 forged eye-bolt (not included) installed in the provided M10 attachment point located on the rear

of the enclosure.



JBL Professional, 8500 Balboa Blvd, Northridge, CA 91329

5/2012 – PN5021248

Produktspecifikationer

Varumärke:	JBL
Kategori:	högtalare
Modell:	AW526
Färg på produkten:	Roestvrijstaal
Kraftkälla:	AC
Blåtand:	Ja
Ljudformat som stöds:	MP3
USB uttag:	Ja
Typ av anslutningskontakt:	3,5 mm
Antal HDMI-portar:	1
Genomsnittlig effekt:	50 W
Antal högtalare:	1
Hörlursutgångar:	1
Antal USB-anslutningar:	1
Inspänning:	100-240 V
Frekvens:	50 - 60 Hz
Fjärrstyrd:	Ja
Spela MP3:	Ja
Spela upp skivformat:	CD audio, DVD-Audio
AUX ingång:	Ja
Typ-av-optisk-enhet:	CD
Frekvensband som stöds:	FM
Optisk skivspelare:	Ja
Kassettdäck:	Nee
Fjärrkontroll ingår:	Ja
Type beeldscherm:	LCD