JBL Control 1 Pro White Bruksanvisning

JBL högtalare Control 1 Pro White

Läs nedan 📖 manual på svenska för JBL Control 1 Pro White (4 sidor) i kategorin högtalare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

Control 1 Pro

Product User’s Guide

Two-Way, Professional Compact Loudspeaker

Key Features

• 150 Watts Continuous Power

Handling

• Professional Drivers and

Crossover Network

• Included Mounting Bracket

• Transparent and Faithful

Sonic Performance

• Magnetically Shielded Enclosure

• SonicGuard™ Overload

Protection

Your Control 1 Pro is a compact, high-

performance professional loudspeaker

system that features monitor-grade low

and high frequency drivers coupled with

a professional crossover network. The

rugged and durable molded enclosure is

magnetically shielded making the Control 1

Pro ideal for use with video and computer

monitors or other magnetically sensitive

equipment. Moreover, the Control 1 Pro’s

compact design is ideal for audio-visual

applications, computer workstations,

recording and broadcast studios, mobile

audio-video control rooms and foreground

and background music.

A) Screw the metal rod/ball assembly (1) into the threaded insert (2) on the back of

the cabinet (8) until it is seated against the bottom of the insert.

B) Next, tighten the “knurled” nut (3) with a small wrench until it is seated against the

back of the cabinet. Tighten the nut until it has “locked” the rod/ball assembly (1)

to the cabinet. Note: the nut may leave marks on the back of the cabinet where

the attachment is made however, the ﬂange of the nut will cover these marks.

Control 1 Pro

Bracket Assembly and Mounting Guide

Control 1 Pro User’s Guide

If there is no sound from your speakers:

• Make sure your power ampliﬁer is on and the gain is set above its minimum setting.

• Make sure there is a signal to your ampliﬁer from your mixer.

• Ensure all wires are connected and that none are cut or frayed.

• If more than one pair of speakers is being used, check the minimum impedance

requirments of your ampliﬁer (overloading your ampliﬁer can result in damage to

your amp).

If there is no sound from one of your speakers:

• Check the balance control on your mixer.

• Check the channel output gains of your ampliﬁer.

• Ensure all wires are connected and that none are cut or frayed.

If there is no (or weak) bass output or a poor stereo image:

• Make sure the polarities (+ and -) of the speakers inputs are properly connected.

C) Mount the wall bracket plate (4) onto a ﬂat sturdy surface using the

appropriate mounting hardware for the surface. A safety cable (5) (not

included) may be attached to the wall bracket via its eyelet (6) at one of the

two lower screw mounting points or to a secondary point off the mounting plate.

D) Next, slip the large molded nut (7) over the ball on the metal rod/ball assembly (1).

E) Holding the cabinet (8) with both hands, insert the ball on the metal rod/ball

assembly (1) into the cup of the wall plate (4).

F) Orient the speaker into the desired position and hand tighten the molded nut

(7). Once the orientation is ﬁnalized, use the metal bar (9) in one of the holes

on the molded nut (7) to securely tighten.

G) Finally, clip the safety cable to the cabinet’s safety bar (10) on the back of the

cabinet.

The Control 1 Pro’s logo can be oriented for display at 90° increments. To rotate the

logo, ﬁrst gently pry the grille and gasket from the cabinet. Next, push-in the logo’s

fastener (found on the underside of the grille) and rotate the logo to the desired

position.

Rotating the Logo

Troubleshooting

JBL Professional

Produktspecifikationer

Varumärke:	JBL
Kategori:	högtalare
Modell:	Control 1 Pro White
Vikt:	1800 g
Bredd:	159 mm
Djup:	143 mm
Höjd:	235 mm
Rekommenderad användning:	Universal
Impedans:	4 Ω
Lämplig för utomhusbruk:	Nej
Ljudutgångskanaler:	2.0 kanaler
Högtalarplacering:	Väggfästningsbar
Antal förare:	1
Känslighet:	87 dB
Monteringsfästen ingår:	Ja
Förstärkare:	Inbyggd
Produktens färg:	Vit
Förpackningstyp:	Låda
Vikt inkl. förpackning:	4600 g
Uteffekt (RMS):	150 W
diskanthögtalare:	Ja
Material, hölje:	Polypropylen (PP)
Frekvensområde:	80 - 20000 hz
Anslutningsteknologi:	Kabel
Högtalartyp:	1-vägs
Högtalarelement, diameter:	135 mm
Signal/brusförhållande (SNR):	108 dB
Disktanthögtalare diameter:	0.75 "
Antal tweeter förare:	1
Övergångsfrekvens:	4200 hz
Magnetiskt skyddad:	Ja
Bindande stolpe:	Ja
Transducermaterial:	Polykarbonat