Jeffrey Alexander Savino VKITSAV36GRBGR Bruksanvisning

Läs gratis den bruksanvisning för Jeffrey Alexander Savino VKITSAV36GRBGR (4 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 9 recensioner. Har du en fråga om Jeffrey Alexander Savino VKITSAV36GRBGR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

ASSEMBLY INSTRUCTIONS

FOR VANITY TOP & UNDERMOUNT BOWL**

CAUTION:Risk of personal injury. Handle with care. Product can break, chip, or cause

injury if mishanded.

NOTE: If you are unsure of assembling and installing the vanity top and bowl,

Hardware Resources recommends that you seek an installation professional.

1. Prepare

a. Carefully place the vanity top POLISHED side down on a

soft smooth surface to prevent scratching or scung.

b. Clean the under side of the vanity top with a damp towel

to remove any debris to ensure a secure seal to the bowl.

c. Allow time for the vanity top to dry before proceeding to

Step 2.

2. Draw a Template

a. Place the bowl on the exposed surface of the vanity top

and center it between the anchor holes.

b. Situate the bowl so that the overow hole is facing the

front of the vanity top (opposite from the plumbing holes).

c. Using the pencil, trace around the entire edge of the bowl.

d. Once the template is completed, carefully remove the bowl.

3. Apply Silicone

a. Apply a generous bead of Bath & Tile silicone around the

entire template between the drawn line and the bowl

cutout.

b. Carefully and quickly place bowl back onto the vanity top

using the drawn template as a guide.

c. Again, situate the bowl so that the overow hole is facing the

front of the vanity top (opposite from the plumbing holes).

4. Attach Brackets

a. Place brackets over the anchor holes in the vanity top and

tighten with the provided screws.

Note: Hardware Resources vanity bowls include anchor kits and screws.

These Jerey Alexander vanity tops are pre anchored and will not require

the additional set of anchor pieces. Only the brackets and screws will be used.

TOOLS & SUPPLIES NEEDED:

• Bath & Tile Silicone Sealant • Screwdriver • Pencil

**Instructions are applicable for the installation of Hardware Resources bowls, tops, and vanities. If using other components, follow manufacturer instructions.

Produktspecifikationer