JETI JMS-MSW Bruksanvisning


Läs gratis den bruksanvisning för JETI JMS-MSW (4 sidor) i kategorin Radiostyrda leksaker. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 11.5 recensioner. Har du en fråga om JETI JMS-MSW eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
User manual: Magnetic switch
-1-
1. Introduction
The Magnetic switch is an electronic switching device designed to be used as a switch for JETI
model products. A big advantage of electronic switches in comparison to mechanical switches is that,
in general, electronic switches are highly resistant to vibration. Also, virtually an unlimited number
of ON and OFF cycles is guaranteed with an electronic switch. Because electronic switches have no
mechanically movable elements, contacts etc. to wear out, an extremely long service life is another
important feature. Unlike with mechanical switches, electronic switches cannot be unexpectedly or
falsely tripped.
The Magnetic switch’s trigger pad is designed for installation on an aircraft fuselage. The system is
switched on and off using a special magnet (see chapter 3).
2. Connection
The Magnetic switch has 4 outputs that can be connected via three-wire cable with JR connector.
The outputs are divided into two pairs, one pair of outputs is electrically isolated (using an opto
coupler). Each pair of outputs has a single non-inverted output and a single inverted output.
ESC
Opto


Produktspecifikationer

Varumärke: JETI
Kategori: Radiostyrda leksaker
Modell: JMS-MSW

Behöver du hjälp?

Om du behöver hjälp med JETI JMS-MSW ställ en fråga nedan och andra användare kommer att svara dig