JL Audio ETXv3 M-MCPv3-1.31 Bruksanvisning
JL Audio
Grillplatta
ETXv3 M-MCPv3-1.31
Läs gratis den bruksanvisning för JL Audio ETXv3 M-MCPv3-1.31 (7 sidor) i kategorin Grillplatta. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 3 recensioner. Har du en fråga om JL Audio ETXv3 M-MCPv3-1.31 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
Installation Instructions for
M-MCPv3-1.315 • M-MCPv3-1.660 • M-MCPv3-1.900
M-MCPv3-2.000 • M-MCPv3-2.250
M-MCPv3-2.375 • M-MCPv3-2.500
PI PE M O U N T IN G FI X T UR E S (FI XE D)
FOR ET Xv3 ENCLOSED SPEAKER SYSTEMS
ere are two speaker cable routing options. For
applications where the cable cannot be routed through
the pipe, the cable can be passed through one of the
openings on the side of the xture.
1A
Determine the speaker mounting location, and
temporarily secure the two xture halves around the pipe
by hand tightening the four 1/4 - 20 x 1-1/4” machine
screws.
2
For applications where the cable can be routed through
the pipe, the cable can be passed through the opening on
the underside of the xture. Steps 2-3 are only needed
for this option.
1B
Adjust the angle of the xture to the to the desired
position, and mark the location for the speaker cable
hole. Remove the xture assembly, and drill a 1/2” hole
on the mark.
3
OR
Apply Loctite® red thread-locking compound (included)
to two 5/16 - 18 x 1-1/4” machine screws (included),
thread them into the lower half of the xture, and
push down on the xture to ensure no gap while fully
tightnening.
4
Slide the excess speaker cable and the butt connectors
into the opening in the pipe as you raise the enclosure to
ush the xture to the pipe.
6
Have a helper support the enclosure during this step.
Use the supplied butt connectors to connect the red (+)
and black (-) speaker cable exiting the ETXv3 enclosure
to the speaker cable exiting the pipe. e green and white
wires will not be used in this application.
5
Align the upper and lower halves of the xture around
the pipe. Hand-tighten four 1/4 - 20 x 1-1/4” machine
screws into the xture. DO NOT TIGHTEN FULLY AT
THIS POINT.
7
Produktspecifikationer
| Varumärke: | JL Audio |
| Kategori: | Grillplatta |
| Modell: | ETXv3 M-MCPv3-1.31 |
Behöver du hjälp?
Om du behöver hjälp med JL Audio ETXv3 M-MCPv3-1.31 ställ en fråga nedan och andra användare kommer att svara dig
Grillplatta JL Audio Manualer
9 September 2024
15 Augusti 2024
6 Augusti 2024
5 Augusti 2024
2 Augusti 2024
Grillplatta Manualer
- Kalorik
- Wolf
- Biltema
- Landmann
- Imetec
- Bestron
- Gaggenau
- Mestic
- Vakoss
- Proline
- Globe
- Thomas
- Silvercrest
- Brandt
- Fritel
Nyaste Grillplatta Manualer
31 Mars 2025
27 Mars 2025
22 Mars 2025
12 Mars 2025
12 Mars 2025
10 Mars 2025
7 Mars 2025
5 Mars 2025
2 Mars 2025
28 Februari 2025