JL Audio Stealthbox SB-POL-GNRL/10TW3 Bruksanvisning

JL Audio Inte kategoriserad Stealthbox SB-POL-GNRL/10TW3

Läs gratis den bruksanvisning för JL Audio Stealthbox SB-POL-GNRL/10TW3 (9 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 4.5 recensioner. Har du en fråga om JL Audio Stealthbox SB-POL-GNRL/10TW3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/9

I N S T A L L A T I O N G U I D E

for the

SB-POL-GNRL/10TW3

SKU# 94656

2016 & Up Polaris General

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely

vital that the Stealthbox® be properly mounted to the vehicle

according to these instructions. Failure to mount the enclosure

properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULT Y:

ESTIMAT ED TIME:

3-4 HOURS

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

Continued on Next Page

OUT

SB-POL-GNRL/10TW3 INSTR_SKU# 011501

I N C LUD E D H A R D W A R E

Continued on Next Page

Page 2 • JL Audio, Inc., 2017

SB-POL-GNRL/10TW3 INSTR_SKU# 011501

BOM ID Qty SKU Description

1 3 151164 1/4 - 20 U-Nut

2 7 153818 1/4” Stainless Steel Flat Washer

3 7 153729 1/4 - 20 x 1” Stainless Steel Serrated Flange Bolt

4 1 153936 Top Bracket

5 2 153931 M6 - 1 x 20mm Stainless Steel Hex Head Bolt

6 4 153932 M6 Stainless Steel Flat Washer

7 1 153937 Front Bracket

8 2 153933 M6 Stainless Steel Serrated Flange Locknut

- 1 150249 Foam Strips (not shown)

Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.

P O W E R R E C O M M E N D AT I O N

JL Audio recommends high quality ampliers such as the JL Audio MX300/1. The diagram below shows the recommended crossover settings for the MX300/1. For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

C O N N E C T I O N S

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for