Jonard Tools FPM-55 Bruksanvisning
Jonard Tools
Mätutrustning
FPM-55
Läs gratis den bruksanvisning för Jonard Tools FPM-55 (2 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 11 recensioner. Har du en fråga om Jonard Tools FPM-55 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
FPM-55
OPTICAL POWER METER W/ STORAGE
INSTRUCTION MANUAL
Unit will not turn on Faint
display on the LCD screen
1. Power is OFF
2. The battery power is too low
1. Turn the device ON by
pressing the Power Key
2. Replace the batteries
Inaccurate Measurements 1. Optical connector is not clean
2. Incorrect fiber connection
1. Clean the optical connectors
with contact cleaner
2. Ensure you are using the
correct connector and reattach
the fiber
Problem Possible Cause Solution
Keys and Functions (Continued):
Delete Key – Delete Data/Cancel
While viewing a data entry, you can press the Delete Key to delete the data.
While in Saving Mode, press the Delete Key to delete the current saved data
– Switch between dBm, dB, and W measurementsUnits Key
Press the Units Key to switch between absolute measurement (dBm), relative
measurement (dB), and xW of the optical power.
mW to dBm Conversion: 10 log(mW)=(dBm)
mW, uW, nW Conversion: 1 mW=103 uW=106 nW
– Stores the current power value as the reference valueREF Key
Press the REF Key to store the current power value as the reference value. When pressed,
the reference value will be displayed in the top-right of the screen with “Ref” displayed
next to it.
Relative Value = l︱Absolute Value︱l -︱l Reference Value︱l
Intelligent Backlight Controller LEDLDR LED –
If this LED is on, then the unit is in LDR Intelligent Backlight Control Mode. While in this
mode, the unit will automatically adjust the backlight based on the outside lighting, which
helps save power.
– Backlight Mode Indication LED B/L SET LED
If the LED is green, then the FPM-55 is in LDR Intelligent Backlight Control Mode.
If the LED is red, then the FPM-55 is in Key-Control Mode
Indicate backlight control mode. Green light indicate that “LDR”intelligent backlight control
mode, Red light indicate that key-control mode
Electric/electronic/battery powered products & force gauges 1 Year
Product Type Warranty Period
Jonard Tools Warranty:
Troubleshooting:
Produktspecifikationer
| Varumärke: | Jonard Tools |
| Kategori: | Mätutrustning |
| Modell: | FPM-55 |
Behöver du hjälp?
Om du behöver hjälp med Jonard Tools FPM-55 ställ en fråga nedan och andra användare kommer att svara dig
Mätutrustning Jonard Tools Manualer
29 December 2024
Mätutrustning Manualer
- Toolland
- Kreg
- Enda
- Mitutoyo
- Camille Bauer
- VirtuFit
- Flex
- Sekonic
- P3 International
- Zircon
- Cliff
- Festo
- Oscium
- Monacor
- TFA Dostmann
Nyaste Mätutrustning Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025