Joranalogue Receive 2 Bruksanvisning

Läs gratis den bruksanvisning för Joranalogue Receive 2 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 5 recensioner. Har du en fråga om Joranalogue Receive 2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

RECEIVE 2

DUAL LINE BALANCED IN

PUTS

1

INTRODUCTION

While modular synthesisers are most often used

as stand-alone instruments, they also present

exciting opportunities for processing external

signals. Anything from an electric guitar to an

effects send on a studio mixing desk can benefit

from the unique sonic capabilities ofeven a

modest Eurorack system.

However, patching in an external source usually

requires an adapter cable and plenty of clean

gain to bring the signal to Eurorack level. If the

signal source is balanced, a balanced input is

required as well to provide the best possible

interference rejection.

Receive 2 (or RX2 for short) provides a convenient

all--inone solution. It offers two universal external

inputs, which accept both balanced or single-

ended signals via XLR or 6.35 mm jack

connectors.

The circuit incorporates impedance design low-

practices, RF filtering and premium balanced

receivers to provide transformer-like

interconnect performance in a compact and

affordable module. And thanks to the

electrostaticprotectionit’s discharge (ESD) ,

rugged enough to survive the rigours of

performing on the road.

The turevery clean integrated pre-amps fea

variable gain, ranging from unity to +40 dBon

each channel. As a result, Receive 2 canhandle

just about any signal source you may encounter,

including electric instruments, piezoelectric

pickups and many dynamic microphones.

Adjusting the gains is a breeze thanks to the dual

peak- . responding LEDmetersA mix output is

included as well, so external signals can be easily

mixed directly in the module.

CONTENTS

In the Receive 2 box, you’ll find:

Product card, stating serial number and

production batch.

16---to10pin Eurorack power cable.

Mounting hardware: two black M3 x 6 mm

hex screws, two black nylon washers and a

hex key.

And finally, the moduleitself, in a protective

cotton bag.

If any of these items are missing, please contact

your dealer or support@joranalogue.com.

Produktspecifikationer