Joy-it BUTTON22 Bruksanvisning
Joy-it
Inte kategoriserad
BUTTON22
Läs nedan 📖 manual på svenska för Joy-it BUTTON22 (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 21 personer och betygsatt med 4.7 stjärnor i genomsnitt av 11 användare
Sida 1/4
BUTTON22
High current microswitch button with LED light-
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact us.
This manual is about the Button22A, Button22B and Button22C. In the
following, you will find how to connect your button and what you have to
consider during your usage.
For your own safety, this product may only be
installed by a qualified electrician! Working on
electric devices / systems implies the hazard of
electric shocks which may cause serious injuries or
even death!
!
2. LATCHING OR MOMENTARY
We oer this type of buttons as latching or momentary. Here, latching
means that the button holds the pressed position. Momentary means
that the button automatically resumes its original position aer being
pressed.
This is, for example, marked in the article number of our buttons as L
(latching) or as M (momentary).
3. CONNECTION OF THE BUTTONS
The buttons are connected by using NC (Normally Closed), COM and NO
(Normally Open). NC means that the button opens the circuit when
pressed. When connected with NO, the circuit is closed when pressed.
COM is the common connection for NO and NC.
4. CONNECTION BUTTON 22A
Cable Connection
Red 3 to 8 V
Black GND
Yellow NC
Green COM
Blue NO
When using the buttons 22B, you can use NC or NO, if necessary, by
connecting one cable to NC or NO and the other to COM.
LED
4. CONNECTION BUTTON 22B
When using the buttons 22B, you can use NC or NO, as required, by using
both cables of the corresponding color for the power supply.
Cable
Red 3 to 8 V
Black GND
Yellow NC
Blue NO
5. CONNECTION BUTTON 22C
With this button you always connect red to black. The use of two cables is
suicient.
Attention! This button should only be used with max. 8 V
DC! Higher voltages can cause damage to the built in LED in -
the button, because it is connected to the power supply of
the button.
LED
Produktspecifikationer
| Varumärke: | Joy-it |
| Kategori: | Inte kategoriserad |
| Modell: | BUTTON22 |
Behöver du hjälp?
Om du behöver hjälp med Joy-it BUTTON22 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Joy-it Manualer
8 April 2025
8 April 2025
31 Januari 2025
29 Januari 2025
29 Januari 2025
15 Januari 2025
2 Januari 2025
28 December 2024
5 December 2024
5 December 2024
Inte kategoriserad Manualer
- Inte kategoriserad XTRARM
- Inte kategoriserad GW Instek
- Inte kategoriserad Maytag
- Inte kategoriserad CEDAR
- Inte kategoriserad Faber
- Inte kategoriserad Flavel
- Inte kategoriserad Xuma
- Inte kategoriserad FeiyuTech
- Inte kategoriserad SE Electronics
- Inte kategoriserad Vango
- Inte kategoriserad Samlex
- Inte kategoriserad Wallas
- Inte kategoriserad EBS
- Inte kategoriserad MEE Audio
- Inte kategoriserad Cilio
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025