Joy-it JDS6600 Bruksanvisning
Läs gratis den bruksanvisning för Joy-it JDS6600 (11 sidor) i kategorin Generator. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 8 recensioner. Har du en fråga om Joy-it JDS6600 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/11
JDS6600
Dual-Channel Signal Generator
1. GENERAL INFORMATION
Dear customer,
thank you for purchasing our product. In the following, we have listed what
you should consider during commissioning.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
2. DEVICE OVERVIEW
DC 5 V
USB-interface for
PC-connection
CH1 parameter
CH2 parameter
waveform
display
status of output
channel
menu bar
dierence of phase between CH1 and CH2
2,4“ TFT LCD
function
keys short cuts
rotary switch
Output
Input
on- / o
switch
TTL-interface for
PC-connection
3. SHORTCUT-OVERVIEW
4. PARAMETER SETTINGS IN THE MAIN INTERFACE
Press to enable or disable simultaneously the output of both
channels.
Use the buttons and to switch between each channel.
By pressing it again while you are in one channel, you activate or
deactivate the according output. Hold down the accord-
ing channel button to place the channel in the main interface.
Press the button to activate the waveform. While the waveform is active,
the form can be changed quickly with the rotary button. The arrows keys can be
used to switch between the waveforms and the
presettings.
Use the multifunctional button 1 ( ) to highlight the frequency para-
meter. Then use the arrow keys to move the cursor to the value which should
be edited. Press the rotary button to edit the according value. Hold down the
multifunctional button to change the unit (μHz, mHz, Hz, KHz, MHz).
Conguration of wave form
Conguration of measuring mode
Activation of the modulation mode
System settings
Moving the position of the cursor
Control of the output from CH1 and CH2
- It is used in other menus as
control and conrmation (on / o)
Selection of channel 1
- Hold down to set channel 1 as the main channel
Selection of channel 2
- Hold down to set channel 2 as the main channel
SYS
WAVE
MEAS
MOD
OK
CH1
CH2
OK
CH1 CH2
WAVE
FREQ
Produktspecifikationer
| Varumärke: | Joy-it |
| Kategori: | Generator |
| Modell: | JDS6600 |
Behöver du hjälp?
Om du behöver hjälp med Joy-it JDS6600 ställ en fråga nedan och andra användare kommer att svara dig
Generator Joy-it Manualer
23 September 2024
17 September 2024
9 September 2024
8 September 2024
7 September 2024
Generator Manualer
- Kinzo
- DuroStar
- Cleveland
- Stanley
- Gude
- Al-ko
- Bosch
- Subaru
- Swiss Kraft
- Global
- Bluetti
- Tektronix
- A-iPower
- Stromkraft
- ThermaSol
Nyaste Generator Manualer
16 Juni 2025
15 Juni 2025
15 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025
7 Juni 2025
6 Juni 2025
27 Mars 2025
27 Mars 2025