Joy-it RB-LCD5 Bruksanvisning

Joy-it Övervaka RB-LCD5

Läs gratis den bruksanvisning för Joy-it RB-LCD5 (6 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 34 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 17.5 recensioner. Har du en fråga om Joy-it RB-LCD5 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
Joy IT powered by SIMAC Electronics GmbH Pascalstr. 8 47506 Neukirchen Vluyn www.joy it.net- - - - - -
5"-TOUCH DISPLAY
RB-LCD 5-
5"-TOUCH DISPLAY
RB-LCD 5-
1. GENERAL INFORMATION
Dear customer,
In the following, we will introduce you to what to observe while starting
up and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
These instructions were written under Raspberry Pi OS
Bookworm for the Raspberry Pi 4 and 5. It has not been
checked with newer operating systems or hardware.
i
2. CONNECTION
The display is simply plugged onto the GPIO strip of your Raspberry Pi.
Then take the enclosed HDMI adapter and plug it into the HDMI port of
the display and the HDMI port of your Raspberry Pi. Make sure you use
the HDMI adapter that matches your Pi.
Pi3 Pi4/5
3. INSTALLATION
To install the display, open a terminal window and enter the following
commands in sequence:
sudo rm rf LCD show- -
git clone https://github.com/goodtft/LCD show.git-
chmod R 755 LCD show- -
cd LCD show/-
sudo ./LCD5 show-
Your Raspberry Pi will then restart automatically.


Produktspecifikationer

Varumärke: Joy-it
Kategori: Övervaka
Modell: RB-LCD5

Behöver du hjälp?

Om du behöver hjälp med Joy-it RB-LCD5 ställ en fråga nedan och andra användare kommer att svara dig