Juki AK-121 Bruksanvisning

Juki Symaskin AK-121

Läs gratis den bruksanvisning för Juki AK-121 (2 sidor) i kategorin Symaskin. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 10 recensioner. Har du en fråga om Juki AK-121 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
1.
ミシンの窓板を取りはずし、ひざ上げ横棒段ね
じ を付属のひざ上げ横棒ピン と交換します。❶ ❷
1.
Remove the window plate of the machine, and
replace the knee lifter connecting rod hinge screw
with the attached knee lifter connecting rod pin
.
自動押え上げ装置
Auto Lifter
AK-121
取扱説明書 /INSTRUCTION MANUAL
この度は、窓板取り付けタイプ自動押え上げ装置を、お買い上げいただきましてありがとうございます。
この装置は、主な特徴として、1)取り付けが簡単、2)ひざ上げ装置と併用できる、などがあります。ご使
用の前にかならずこの取扱説明書をお読みになり、末永くご愛用くださいますようお願い申しあげます。
We heartily appreciate your buying JUKI’s window plate mounting type Auto lifter.
The main features of this equipment are as follws ; 1) Simple installation, 2) Available together with the knee lifter
We recommend you to read these instructions before use, and we hope you will use it for a long time.
取り付け手順 /INSTALLATION
2. AK 装置(組) をミシンに取り付けます。
時、ク のが、
げ横棒 にセットされるように取り付けます。
2. Install the AK device on the machine.
At this time, install it so that the slot of solenoid link
may be set on the knee lifter connecting rod pin .
3. AK 装置(組) をねじ止めします。
3. Tighten the AK device with screws.
No.02
29342508


Produktspecifikationer

Varumärke: Juki
Kategori: Symaskin
Modell: AK-121

Behöver du hjälp?

Om du behöver hjälp med Juki AK-121 ställ en fråga nedan och andra användare kommer att svara dig