Jung ABIS50 Bruksanvisning
Jung
övervakningskamera
ABIS50
Läs gratis den bruksanvisning för Jung ABIS50 (11 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om Jung ABIS50 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/11
Fingerprint system
Ref.-no.: ..BIS 50..
Operating instructions
Fingerprint system
1. Safety Instructions ............................................................................ 1
2. Device layout ..................................................................................... 2
3. Function ............................................................................................. 2
4. Operation............................................................................................ 2
4.1. Storing a master nger ................................................................. 4
4.2. Storing user fingers....................................................................... 5
4.3. Deleting the user finger................................................................. 7
4.4. Deleting all fingers ........................................................................ 7
4.5. Changing the switching output ON time ....................................... 8
5. Fitting and electrical connection..................................................... 9
5.1. Installing the device ...................................................................... 9
5.2. Start-up ....................................................................................... 10
6. Appendix .......................................................................................... 10
6.1. Technical data............................................................................. 10
6.2. Control functions – overview....................................................... 10
6.3. Accessories................................................................................. 11
6.4. Guarantee ................................................................................... 11
1. Safety Instructions
Electrical equipment must be installed and fitted by qualified
electricians only.
Failure to observe the instructions may cause damage to the device
and result in fire or other hazards.
Only for indoor use.
The device is not protected against tampering. Do not use in areas
critical with regard to safety or in combination with alarm systems.
This device is a safety class III device. Use a safety transformer as
per EN 61558 with an output voltage of 12 VDC as power supply.
For the installation and for the laying of cables observe the relevant
specications and the standards for SELV voltages.
These operating instructions are part of the product and must be
left with the final customer.
Stand: Aug-08 325 642 13
Fingerprint system
Ref.-no.: ..BIS 50..
2. Device layout
Fig. 1
(1) Design cover
(2) Indicator LEDs red, amber, green
(3) Line-oriented sensor
(4) Control button under design cover
3. Function
Designated use
• The device verifies the access authorization of persons by
comparison of their fingerprints. For this verification, the person
demanding access runs a nger over the sensor surface. If the
access authorization is confrmed, the device enables a switching
output for a preset time, e.g. to activate the opener of doors inside a
building.
• Installation in a ush-mounting box as per DIN 49073.
Recommendation: Use the deep mounting box.
Device features
• Storing capability for up to 50 user fingers
• 3 master fingers for administration purposes
• Switching output ON time adjustable between 0.5 and 10 seconds
• 3 coloured LEDs as indicators
• Stored finger data remain stored even after mains failures
• Separate power supply (accessory part) for device required
L The device uses a heated sensor. A slight temperature increase can
be felt when the finger is placed on the sensor. This temperature
increase is of no risk to the user.
The necessary operating temperature is reached 30 seconds max.
after switching on.
4. Operation
Running the finger correctly over the sensor surface
The sensor in the device works like a line scanner. When a finger is run
over the sensor surface, the device builds an image of the ngerprint
(Fig. 2) and stores it.
2
Fingerprint system
Ref.-no.: ..BIS 50..
Fig. 2
L In order to obtain an image as precise as possible of the ngerprint it
is necessary to run the finger uniformly and with a slight pressure over
the sensor surface (Fig. 3). For safe recognition, the stored nger
should always be run in the same way over the sensor surface.
Fig. 3: Proper use
In normal operation the amber LED is permanently on. The device is
ready for operation.
red amber green
Place the nger as deeply as possible into the sensor cavity.
Run the finger uniformly and with a slight pressure over the sensor
surface to ensure that the scanned area of the finger is as large as
possible (Fig. 3).
The amber LED flashes during the evaluation of the fingerprint.
red amber green
After a brief evaluation period and after recognition of the fingerprint, the
green LED is switched on and the switching output is enabled. The
amber LED is permanently on.
red amber green
3
Produktspecifikationer
| Varumärke: | Jung |
| Kategori: | övervakningskamera |
| Modell: | ABIS50 |
Behöver du hjälp?
Om du behöver hjälp med Jung ABIS50 ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Jung Manualer
13 September 2024
1 September 2024
31 Augusti 2024
28 Augusti 2024
28 Augusti 2024
26 Augusti 2024
22 Augusti 2024
21 Augusti 2024
18 Augusti 2024
17 Augusti 2024
övervakningskamera Manualer
- Aigis
- Nextech
- Owltron
- Speco Technologies
- Nedis
- Samsung
- Flamingo
- Security Labs
- BirdDog
- Trendnet
- Ferguson
- Defender
- Approx
- Kramer
- Netatmo
Nyaste övervakningskamera Manualer
15 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025