Jung CD1718 Bruksanvisning
Jung
Inte kategoriserad
CD1718
Läs gratis den bruksanvisning för Jung CD1718 (10 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 10.5 recensioner. Har du en fråga om Jung CD1718 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/10
LB management
LB management
LB management
LB managementLB management
Standard automatic switch 1.1 m, Standard automatic switch 2.2 m
Standard automatic switch 1.1 m
Standard automatic switch 1.1 m
Standard automatic switch 1.1 m
Standard automatic switch 1.1 mStandard automatic switch 1.1 m
Art. no. ..17180..
Standard automatic switch 2.2 m
Standard automatic switch 2.2 m
Standard automatic switch 2.2 m
Standard automatic switch 2.2 mStandard automatic switch 2.2 m
Art. no. ..17280..
User manual
User manual
User manual
User manualUser manual
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or load. In
Danger of electric shock. Always disconnect before carrying out work on the devise or load. In
Danger of electric shock. Always disconnect before carrying out work on the devise or load. In
Danger of electric shock. Always disconnect before carrying out work on the devise or load. InDanger of electric shock. Always disconnect before carrying out work on the devise or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
device and or load.
device and or load.
device and or load.device and or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The loadDanger of electric shock. Device is not suitable for disconnection from supply voltage. The load
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.is not electrically isolated from the mains even when the device is switched off.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.Do not press on the sensor window. Device can be damaged.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.The device is not suitable for use as a burglar alarm or other alarm.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
2
2
2
22 Intended use
Intended use
Intended use
Intended useIntended use
– Automatic switching of lighting depending on the heat motion and ambient brightness
– Operation with flush-mounted insert for dimming or switching or 3-wire extension from LB
management
– Wall installation on flush-mounted insert
Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
– Extension of the detection area in combination with 3-wire extension
– Operation with 2-wire or 3-wire extension, rotary dimmer extension or push-button
– Selectable brightness threshold
– Selectable sensitivity
– Fixed run-on time
– Switch on with last saved brightness or saved switch-on brightness, with dimming insert
– Switch-on brightness can be saved permanently via extension, with dimming insert
– Dimming light via extension with dimming insert
Motion detector cover 1.10m
– Screen for limiting the detection area
Automatic operation
Automatic operation
Automatic operation
Automatic operationAutomatic operation
The device detects heat motions of people, animals and objects.
– The light is switched on if a person enters the detection area and the brightness is below
the set threshold.
– The run-on time restarts with each detected motion.
– The light is switched off, if:
no more movement is detected in the detection area and the run-on time has elapsed or
the ambient light is too bright and the run-on time has elapsed.
To avoid any switch-on caused by a cooling illuminant, no movement signals are evaluated for a
brief lockout time after switching off. The motion detector adjusts itself to the ambient conditions
to keep the time as short as possible.
1 / 10
32599603 04.05.2018
J0082599603
Produktspecifikationer
| Varumärke: | Jung |
| Kategori: | Inte kategoriserad |
| Modell: | CD1718 |
Behöver du hjälp?
Om du behöver hjälp med Jung CD1718 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Jung Manualer
28 Mars 2025
28 Mars 2025
28 Mars 2025
28 Mars 2025
27 Mars 2025
1 Februari 2025
1 Januari 2025
14 December 2024
10 December 2024
10 December 2024
Inte kategoriserad Manualer
- Comatec
- Autel
- Giordani
- Tanita
- Kospel
- Whirlwind
- Triumph Sports
- Foxconn
- Goobay
- Thomson
- Upo
- Mooer
- Karma
- Dutchbone
- Sharkbite
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025