Jung MBT 2424 Bruksanvisning


Läs gratis den bruksanvisning för Jung MBT 2424 (27 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 10.5 recensioner. Har du en fråga om Jung MBT 2424 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/27
Signal panel
Signal panel
Art. No. : MBT 2424
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
damaged.
Do not operate the device with sharp or pointed objects. The surface could be damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Front view
(1) Sensor areas with status LED
(2) Labelling with push-in labels
(3) Position of the programming LED
(4) Fastening screws, front plate
A suitable bit for the safety screw is included.
3 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
1/7
82575503
J:0082575503
13.06.2013


Produktspecifikationer

Varumärke: Jung
Kategori: Inte kategoriserad
Modell: MBT 2424

Behöver du hjälp?

Om du behöver hjälp med Jung MBT 2424 ställ en fråga nedan och andra användare kommer att svara dig