JVC DLA-RS2000 Bruksanvisning
Läs gratis den bruksanvisning för JVC DLA-RS2000 (99 sidor) i kategorin Beamer. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2.5 recensioner. Har du en fråga om JVC DLA-RS2000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/99
.
D-ILA
PROJECTOR
DLA-RS3000
DLA-RS2000
DLA-RS1000
.
.
http://manual3.jvckenwood.com/projector/mobile/global/
The Mobile User Guide can be viewed on mobile internet devices including
smartphones and tablets.
Mobile User Guide
This instruction manual is intended for software version 3.50 or later. If you are using an older
software version, please make use of the instruction manual (for software versions up to 3.10)
(B5A-2809-3C).
.
Pour utilisation par le client :
Entrerci-dessous le N°de série qui
est situé sous le boîtier. Garder
cetteinformation comme référence
pour le futur.
Instrucción para el cliente :
Introduzca a continuación el nº de
serie que aparece en la parte
inferior lateral de la caja. Conserve
esta información como referencia
para uso ulterior.
For Customer use :
Enter below the serial No. which is
located on the side of the cabinet.
Retain this information for future
reference.
DLA-RS3000,
DLA-RS2000,
DLA-RS1000,
DLA-RS3000,
DLA-RS2000,
DLA-RS1000,
DLA-RS3000,
DLA-RS2000,
DLA-RS1000,
Model No.
Serial No.
N° de modèle
N° de série
Modelo Nº
Nº de serie
Not suitable for household room illumination.
INSTRUCTIONS
B5A-2809-5C
Getting Started Set up Operate Adjust/Set Maintenance
Troubleshooting
Others
Safety Precautions
This product has a High Intensity
Dis-charge (HID) lamp that contains
mercury. Manage in accord with
disposal laws.
Disposal of these materials may be
regulated in your community due to
environmental considerations. For
disposal or recycling information,
please contact your local authorities or
for USA, the Electronic Industries
Alliance: http://www.eiae.org. or call
1-800-252-5722(For USA)
or 1-800-964-2650(For Canada).
IMPORTANT INFORMATION
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
FCC INFORMATION (U.S.A. only)
CAUTION:
Changes or modification not approved by JVC could
void the user’s authority to operate the equipment.
About the installation place
Do not install the projector in a place that cannot
support its weight securely.
If the installation place is not sturdy enough, the
projector could fall or overturn, possibly causing
personal injury.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Consult the dealer or an experienced radio/TV
technician for help.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
NOTE:
This equipment has been tested and found to comply
with the limits for Class B digital devices, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encourage to try to
correct the interference by one or more of the
following measures:
WARNING:
THIS APPARATUS MUST BE EARTHED.
CAUTION:
To reduce the risk of electric shock, do not remove
cover. Refer servicing to qualified service personnel.
This projector is equipped with a 3-blade grounding
type plug to satisfy FCC rule. If you are unable to
insert the plug into the outlet, contact your electrician.
晼㯡婌♟㒷
For the customers in Taiwan only
NOISE EMISSION DECLARATION
The sound pressure level at the operator position is
equal or less than 50dB(A) according to ISO7779.
Model Number: DLA-RS3000K, DLA-RS2000K,
DLA-RS1000K
Trade Name: JVC
Responsible party: JVCKENWOOD USA Corporation
Address: 500 Valley Road, Suite 203 Wayne, NJ 07470
Telephone Number: 973-317-5000
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Declaration of Conformity
2
Getting Started
PORTABLE CART WARNING
(symbol provided by RETAC)
S3126A
-
-
-
-
-
-
-
-
-
-
-
-
-
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions.
This unit has been engineered and manufactured to
assure your personal safety. But IMPROPER USE
CAN RESULT IN POTENTIAL ELECTRICAL
SHOCK OR FIRE HAZARD. In order not to defeat
the safeguards incorporated into this product,
observe the following basic rules for its installation,
use and service. Please read these Important
Safeguards carefully before use.
All the safety and operating instructions should be read
before the product is operated.
The safety and operating instructions should be retained for
future reference.
All warnings on the product and in the operating
instructions should be adhered to.
All operating instructions should be followed.
Place the projector near a wall outlet where the plug can be
easily unplugged.
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
Do not use attachments not recommended by the product
manufacturer as they may be hazardous.
Do not use this product near water. Do not use immediately
after moving from a low temperature to high temperature,
as this causes condensation, which may result in fire,
electric shock, or other hazards.
Do not place this product on an unstable cart, stand, or
table. The product may fall, causing serious injury to a child
or adult, and serious damage to the product. The product
should be mounted according to the manufacturer’s
instructions, and should use a mount recommended by the
manufacturer.
When the product is used on a cart,
care should be taken to avoid quick
stops, excessive force, and uneven
surfaces which may cause the product
and cart to overturn, damaging
equipment or causing possible injury to
the operator.
Slots and openings in the cabinet are
provided for ventilation. These ensure reliable operation of
the product and protect it from overheating. These
openings must not be blocked or covered. (The openings
should never be blocked by placing the product on bed,
sofa, rug, or similar surface. It should not be placed in a
built-in installation such as a bookcase or rack unless
proper ventilation is provided and the manufacturer’s
instructions have been adhered to.)
To allow better heat dissipation, keep a clearance between
this unit and its surrounding as shown below. When this unit
is enclosed in a space of dimensions as shown below, use
an air-conditioner so that the internal and external
temperatures are the same. Overheating can cause
damage.
-
-
-
-
-
-
-
-
a)
b)
c)
d)
e)
f)
When the power supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen on the
product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the Operation Manual, as an improper
adjustment of controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to normal operation.
If the product has been dropped or damaged in any
way.
When the product exhibits a distinct change in
performance, this indicates a need for service.
Power source indicated on the label. If you are not sure of
the type of power supply to your home, consult your
product dealer or local power company.
This product is equipped with a three-wire plug. This plug
will fit only into a grounded power outlet. If you are unable
to insert the plug into the outlet, contact your electrician to
install the proper outlet. Do not defeat the safety purpose of
the grounded plug.
Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at doors,
plugs, receptacles, and the point where they exit from the
product.
For added protection of this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the cable system. This will prevent damage to
the product due to lightning and power line surges.
Do not overload wall outlets, extension cords, or
convenience receptacles on other equipment as this can
result in a risk of fire or electric shock.
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltages
and other hazards. Refer all service to qualified service
personnel.
Unplug this product from the wall outlet and refer service to
qualified service personnel under the following conditions:
-
-
-
-
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or with same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
The product should be placed more than one foot away
from heat sources such as radiators, heat registers, stoves,
and other products (including amplifiers) that produce heat.
When connecting other products such as VCR’s, and DVD
players, you should turn off the power of this product for
protection against electric shock.
150 mm (6 in) and above
150 mm
(6 in) and
above
300 mm
(12 in) and
above
200 mm
(8 in) and
above
300 mm
(12 in) and
above
Front
3
Getting Started
-
-
-
-
-
-
-
-
-
-
-
Do not place combustibles behind the cooling fan. For
example, cloth, paper, matches, aerosol cans or gas
lighters that present special hazards when over heated.
Do not look into the projection lens while the illumination
lamp is turned on. Exposure of your eyes to the strong light
can result in impaired eyesight.
Do not look into the inside of this unit through vents
(ventilation holes), etc. Do not look at the illumination lamp
directly by opening the cabinet while the illumination lamp is
turned on. The illumination lamp also contains ultraviolet
rays and the light is so powerful that your eyesight can be
impaired.
Do not drop, hit, or damage the light-source lamp (lamp
unit) in any way. It may cause the light-source lamp to
break and lead to injuries. Do not use a damaged light
source lamp. If the light-source lamp is broken, ask your
dealer to repair it. Fragments from a broken light-source
lamp may cause injuries.
The light-source lamp used in this projector is a high
pressure mercury lamp. Be careful when disposing of the
light-source lamp. If anything is unclear, please consult
your dealer.
Do not ceiling-mount the projector to a place which tends to
vibrate; otherwise, the attaching fixture of the projector
could be broken by the vibration, possibly causing it to fall
or overturn, which could lead to personal injury.
Use only the accessory cord designed for this product to
prevent shock.
For health reasons, please take a break of about 5-15
minutes every 30-60 minutes and let your eyes rest. Please
refrain from watching any 3D-images when you feel tired,
unwell or if you feel any other discomfort. Moreover, in case
you see a double image, please adjust the equipment and
software for proper display. Please stop using the unit if the
double image is still visible after adjustment.
Once every three years, please perform an internal test.
This unit is provided with replacement parts needed to
maintain its function (such as cooling fans). Estimated
replacement time of parts can vary greatly depending on
frequency of use and the respective environment. For
replacement, please consult your dealer, or the nearest
authorized JVC service center.
When fixing the unit to the ceiling, Please note that we do
not take any responsibility, even during the warranty period,
if the product is damaged due to use of metal fixtures used
for fixation to the ceiling other than our own or if the
installation environment of said metal fixtures is not
appropriate. If the unit is suspended from the ceiling during
use, please be careful in regard to the ambient temperature
of the unit. If you use a central heating, the temperature
close to the ceiling will be higher than normally expected.
Video images can burn into the electronic component parts.
Please do not display screens with still images of high
brightness or high contrast, such as found in video games
and computer programs. Over a long period of time it might
stick to the picture element. There is no problem with the
playback of moving images, e.g. normal video footage.
-
-
-
-
-
-
Not using the unit for a long time can lead to malfunction.
Please power it on and let it run occasionally. Please avoid
using the unit in a room where cigarettes are smoked. It is
impossible to clean optical component parts if they are
contaminated by nicotine or tar. This might lead to
performance degradation.
Please watch from a distance three times the height of the
projected image size. Persons with photosensitivity, any
kind of heart disease, or weak health should not use 3D
glasses.
Watching 3D-images might be cause of illness. If you feel
any change in your physical condition, please stop
watching immediately and consult a physician if necessary.
When watching 3D images, it is recommended to take
regular breaks. As the length and frequency of the required
breaks differ for every person, please judge according to
your own condition.
If your child watches while wearing 3D glasses, it should be
accompanied by its parents or an adult guardian. The adult
guardian should be careful to avoid situations where the
child’s eyes might become tired, as responses to tiredness
and discomfort, etc., are hard to detect, and it is possible
for the physical condition to deteriorate very quickly. As the
visual sense is not yet fully developed in children under the
age of 6, please consult a physician in regard to any
problem concerning 3D-images if necessary.
Note that when using the 3D feature, the video output may
appear different from the original video image due to image
conversion on the device.
* DO NOT allow any unqualified person to
install the unit.
Be sure to ask your dealer to install the unit
(e.g.attaching it to the ceiling) since special
technical knowledge and skills are required for
installation. If installation is performed by an
unqualified person, it may cause personal injury or
electrical shock.
-
-
-
-
-
-
-
Do not use optical instruments (such as magnifying glass or
reflector) viewing the laser output. It may pose an eye
hazard.
When turning on the projector, ensure that no one is looking
into the projection lens.
Do not look into the lens and openings when the light is on.
Doing so would have serious effects on the human body.
Do not detach or attach the projection lens with the power
connected.
Attempting to disassemble, repair or modify the projector
yourself may lead to serious safety issues.
Using a faulty product not only results in electrical shock or
fire hazard, it can cause visual impairment.
When abnormality occur, stop using the projector
immediately and send it to your authorized dealer for repair.
4
Getting Started
ENGLISH
Information for Users on Disposal of Old Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not be disposed
of as general household waste. If you want to dispose of the product or battery,
please consider the collection systems or facilities for appropriate recycling.
Notice:
The sign Pb below the symbol for batteries indicates that this battery contains lead.
Benutzerinformationen zur Entsorgung alter Geräte und Batterien
[Nur Europäische Union]
Diese Symbole zeigen an, dass derartig gekennzeichnete Geräte nicht als normaler
Haushaltsabfall entsorgt werden dürfen. Wenden Sie sich zur Entsorgung des
Produkts oder der Batterie an die hierfür vorgesehenen Sammelstellen oder
Einrichtungen, damit eine fachgerechte Wiederverwertung möglich ist.
Hinweis:
Notification:
Das Zeichen Pb unterhalb des Batteriesymbols gibt an, dass diese
Batterie Blei enthält.
Informations relatives à l’élimination des appareils et des piles usagés, à l’intention des utilisateurs
[Union européenne seulement]
Si ces symboles figurent sur les produits, cela signifie qu’ils ne doivent pas être jetés
comme déchets ménagers. Si vous voulez jeter ce produit ou cette pile, veuillez
considérer le système de collecte des déchets ou les centres de recyclage appropriés.
La symbole Pb en dessous du symbole des piles indique que cette
pile contient du plomb.
Informatie voor gebruikers over het verwijderen van oude apparatuur en batterijen
[Alleen Europese Unie]
Deze symbolen geven aan dat apparatuur met dit symbool niet mag worden
weggegooid als algemeen huishoudelijk afval. Als u het product of de batterij wilt
weggooien, kunt u inzamelsystemen of faciliteiten voor een geschikte recycling
gebruiken.
Opmerking:
Het teken Pb onder het batterijsymbool geeft aan dat deze batterij lood bevat.
Battery
Products
Batterie
Produkte
Pile
Produits
Batterij
Producten
DEUTSCH
FRANÇAIS
NEDERLANDS
Información para los usuarios sobre la eliminación de baterías/pilas usadas
[Sólo Unión Europea]
Estos símbolos indican que el equipo con estos símbolos no debe desecharse
con la basura doméstica. Si desea desechar el producto o batería/pila, acuda
a los sistemas o centros de recogida para que los reciclen debidamente.
Atención: La indicación Pb debajo del símbolo de batería/pila indica que ésta
contiene plomo.
Baterías/pilas
Productos
ESPAÑOL / CASTELLANO
ITALIANO
Informazioni per gli utenti sullo smaltimento delle apparecchiature e batterie obsolete
[Solo per l’Unione Europea]
Questi simboli indicano che le apparecchiature a cui sono relativi non devono
essere smaltite tra i rifiuti domestici generici. Se si desidera smaltire questo
prodotto o questa batteria, prendere in considerazione i sistem i o le strutture di
raccolta appropriati per il riciclaggio corretto.
Nota:
Il simbolo Pb sotto il simbolo delle batter ie indica che questa batteria contiene piombo.
Batteria
Prodotti
6
Getting Started
IEC62471-5
Location information of the mark
As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015
7
Getting Started
Contents
Getting Started
Safety Precautions .................................................. 2
Accessories/Optional Accessories .......................... 9
Check the Accessories ........................................ 9
Optional Accessories ........................................... 9
Controls and Features ........................................... 10
Main Unit - Front ................................................ 10
Main Unit - Bottom ............................................. 10
Main Unit - Side ................................................. 11
Main Unit - Rear ................................................. 11
Main Unit - Input Terminals ................................ 12
Remote Control ................................................. 13
Loading Batteries into the Remote Control ........ 14
Effective Range of Remote Control Unit ............ 14
Menu ................................................................. 15
Set up
Installing the Projector ........................................... 16
Precautions during Installation ........................... 16
Precautions during Mounting ............................. 17
Adjusting the Position ........................................ 18
Connecting the Projector ....................................... 19
Connecting to the HDMI Input Terminal (Digital
Input) ................................................................. 19
Connecting to the LAN Terminal ........................ 20
Connecting to the RS-232C Terminal ................ 20
Connecting to the TRIGGER Terminal ............... 21
Connecting the Power Cord (Supplied Accessory)
...... 21
Operate
Viewing Videos ...................................................... 22
Adjusting the Projector Screen .............................. 24
Adjusting the Lens According to the Projection
Position .............................................................. 24
Adjusting the Screen Size (Aspect) ................... 25
Viewing 3D Movies ................................................ 26
Installing the 3D Synchro Emitter ....................... 26
Viewing 3D Movies ............................................ 27
Adjusting 3D Movies .......................................... 27
Adjust/Set
Selecting an Image Quality According to the Video
Type ...................................................................... 28
Setting the Picture Mode ................................... 28
Setting the Color Profile ..................................... 30
Adjusting to your Preferred Color (Color
Management) .................................................... 33
Viewing HDR Content ........................................... 34
Original HDR Technology of JVC ...................... 34
Collaboration with Panasonic UHD BD Player DP-
UB9000 ............................................................. 36
MPC (Multiple Pixel Control) ................................. 37
Fine-tuning the Image Quality ............................... 38
Adjusting the Output Value of the Projected Image
(Gamma/Tone Mapping) ................................... 38
Fine-tuning of Gamma/Tone Mapping to Preferred
Settings ............................................................. 41
Setting Frame Adapt HDR ................................. 43
Setting Auto Tone Mapping ............................... 44
Reduces the jitter of Fast-moving Images (Motion
Control) .............................................................. 46
Adjustments and Settings in the Menu .................. 48
List of Menu Items ............................................. 48
Picture Adjust ........................................... 50
Input Signal ............................................... 58
Installation ................................................ 60
Display Setup ........................................... 68
Function .................................................... 69
Information ................................................ 71
Maintenance
Replacing the Lamp .............................................. 72
Lamp Replacement Procedure .......................... 72
Resetting the Lamp Time ................................... 74
Maintaining the Cabinet and Remote Control ........ 75
Cleaning and Replacing the Filter ......................... 75
Troubleshooting
Troubleshooting .................................................... 76
When the Following Messages Appear... .............. 80
Others
External Control .................................................... 81
RS-232C Specifications ..................................... 81
TCP/IP Connection ............................................ 81
Command Format .............................................. 82
Remote Control Code ........................................ 83
Communications Example ................................. 84
Specifications ........................................................ 85
Index ..................................................................... 96
Symbols used in this manual
r
indicates a function that is supported by DLA-RS3000.
s
indicates a function that is supported by DLA-RS2000.
t
indicates a function that is supported by DLA-RS1000.
Items not marked with any of the above symbols are
supported by all models.
The illustrations of the projector unit used in this manual
are those of DLA-RS3000. The appearance of the
projector of other models may differ slightly.
8
Getting Started
Operation panel
[MENU]: Displays the menu
[BACK]: Returns to the previous menu
[ ] keys: Selects an itemJKH I
[OK]: Confirms a selection
[ INPUT ]: Switches the inputJ K
A: Turns “on”/“off” the
power
Main Unit - Input Terminals
A B C D E F G
A
A
A
AA [3D SYNCHRO] terminal
By connecting a 3D Synchro Emitter (sold separately)
to this terminal, you can view 3D movies.
B
B
B
BB [HDMI 1] input terminal
C
C
C
CC [HDMI 2] input terminal
For connecting to devices that support HDMI output.
(P. 19)
It is fitted to the M3 lock hole. The depth of the screw
hole is 3 mm (0.1 in).
D
D
D
DD [RS-232C] terminal (D-sub 9-pin
male)
The projector can be controlled by connecting a PC to
this terminal.
E
E
E
EE [SERVICE] terminal
For updating the software using a commercially
available USB flash drive.
F
F
F
FF [LAN] terminal (RJ-45)
The projector can be controlled by connecting it to a
PC through the computer network for control
commands to be sent to the projector.
G
G
G
GG [TRIGGER] terminal
Output terminal for DC 12 V, 100 mA power supply. It
is used for sending output signals to control devices
such as an elevating screen that is equipped with a
trigger function.
Note that improper connection may damage the
projector. (Tip=DC +12 V, Sleeve=GND)
12
Getting Started
Produktspecifikationer
| Varumärke: | JVC |
| Kategori: | Beamer |
| Modell: | DLA-RS2000 |
Behöver du hjälp?
Om du behöver hjälp med JVC DLA-RS2000 ställ en fråga nedan och andra användare kommer att svara dig
Beamer JVC Manualer
3 Mars 2025
1 Januari 2025
14 December 2024
26 September 2024
3 September 2024
2 September 2024
28 Augusti 2024
22 Augusti 2024
22 Augusti 2024
22 Augusti 2024
Beamer Manualer
- La Vague
- Derksen
- Lenovo
- EKO
- OK
- HP
- Toshiba
- Ultimea
- AAXA Technologies
- Easymaxx
- Futurelight
- Aiptek
- ZTE
- Yamaha
- Nebula
Nyaste Beamer Manualer
9 April 2025
9 April 2025
2 April 2025
5 Mars 2025
5 Mars 2025
1 Mars 2025
26 Februari 2025
20 Februari 2025
20 Februari 2025
20 Februari 2025