Katadyn Micro Water Bottle Microfilter Bruksanvisning

Katadyn Marin Micro Water Bottle Microfilter

Läs gratis den bruksanvisning för Katadyn Micro Water Bottle Microfilter (2 sidor) i kategorin Marin. Guiden har ansetts hjälpsam av 33 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 17 recensioner. Har du en fråga om Katadyn Micro Water Bottle Microfilter eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

(2) (3) (4) (5)

The Katadyn Micro Water Bottle Microfilter eliminates the need to carry or locate safe water,

whether you are camping, hiking, paddling, fishing or anytime safe water is required. The

Katadyn Micro places the advanced technology of 0.3 micron pleated glassfiber filter media

and granular carbon into a standard water bottle. The result is a water bottle that meets

industry standards for reduction of bacteria (99.9999% Klebsiella terrigena) and protozoan

cysts (99.9% Giardia and Cryptosporidium).

When To Use

The Katadyn Micro is designed for use with untreated fresh water sources, such as lakes,

rivers and streams. It also provides a convenient alternative to pump-style water filters.

Because it's designed for personal use, the Micro is not suitable for situations when large vol-

umes of water must be treated.

How It Works

The Katadyn Micro Water Bottle Microfilter utilizes a two stage, modular filtration system.

The first stage is a 0.3 micron pleated glassfiber media microfilter cartridge that removes

bacteria, such as Klebsiella terrigena and cysts such as Giardia and Cryptosporidium. The

second stage carbon filter reduces chemicals and unpleasant taste and odors.

Please read the following instructions carefully for maximum performance from your Katadyn

Micro Water Bottle Microfilter. Failure to follow the instructions found in this guide may result

in unsafe drinking water.

Key Components

Microfiltration

Cartridge

Carbon Filter

Bottle

Important Notes

1. In order to be filtered, water must pass through the microfilter cartridge. The flow rate

is slightly slower than an ordinary sports water bottle in order to ensure microfiltration.

2. Squeeze and sip using continuous pressure. You will notice a 2-4 second pause after

squeezing, like using a long straw, before water flows.

3. Always hold bottle upright when drinking. Water will not pass through the cartridge

if bottle is upside down or at an angle.

Product Set-Up - (before first use)

1. Rinse inside of bottle

2. Assemble the cartridge

Attach the Microfilter Cartridge to the bottom of the Carbon Filter. Gently twist each

component while pushing it on. Make sure ALL O-rings and components are fully

sealed and assembled. Firmly twist and push the carbon filter cartridge into the bottle

cap (Figure 2).

3. Flush System (IMPORTANT!)

Before first use, flush system to remove harmless carbon dust. Fill bottle with water. Install

Bottle Cap with assembled cartridge on bottle and tighten. Squeeze bottle tightly with both

hands until water runs clear. (NOTE: Discolored water is normal when flushing.)

1. Fill the bottle with water to the fill line (Figure 3). Remember, the clearer the water, the

longer the microfilter and carbon filter will last.

2. Insert cartridge/bottle cap into bottle. Turn bottle cap clockwise until tight.

3. Open bite valve. Note: The bite valve has two positions. Pull the bite valve out to

open. Push it in to close (Figure 4). Do not remove bite valve.

4. Hold the bottle upright when drinking. Squeeze and sip using continuous pressure.

5. Close bite valve after use.

NOTE: Before each use, flush and discard small amount of water (1 squeeze) to remove

stale taste.

Open

Closed

Thank you for choosing the Katadyn Micro

Water Bottle Microfilter. Normal Operation

Figure 1

Figure 4

Fill Line

Bottle Cap

Figure 3

Figure 2

Bite Valve

070124 Katadyn-8014525 25-01-2007 6:56 Pagina 1

Produktspecifikationer

Varumärke:	Katadyn
Kategori:	Marin
Modell:	Micro Water Bottle Microfilter
Färg på produkten:	Zwart
Vikt:	2070 g
Bredd:	150 mm
Djup:	140 mm
Höjd:	86 mm
Ljudnivå:	- dB
Förpackningens vikt:	2350 g
Förpackningens bredd:	194 mm
Djuppackning:	276 mm
Förpackningshöjd:	120 mm
Nuvarande:	6.3 A
Avsedd för:	PC
Antal fans:	1 ventilator(en)
Strömspänningsskydd:	Over power, Over voltage, Short circuit, Under voltage, Overheating
80 PLUS certifiering:	80 PLUS Gold
Medeltid mellan fel (MTBF):	100000 uur
Totala tillgångar:	550 W
Effektivitet:	90 procent
(Ytter) huvudpaketets höjd:	220 mm
(Ytter) huvudförpackningens bredd:	290 mm
(Ytre) huvudpaketets längd:	620 mm
Kvantitet per (yttre) huvudkartong:	5 stuk(s)
Produkter per pall:	16 stuk(s)
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Drifttemperatur (TT):	0 - 45 °C
Ventilator diameter:	120 mm
Anslutning för diskettstation:	Ja
Moderkortsformfaktorer som stöds:	ATX
Moderkorts strömkontakt:	20+4 pin ATX
Perifera (Molex) strömkontakter (4-stift):	3
Strömförsörjningsformfaktor (PSU):	ATX
Lagerteknik:	LDB
Power Factor Correction (PFC) typ:	Actief
Kombinerad effekt (+3,3V):	100 W
Kombinerad effekt (+12V):	549.6 W
Kombinerad effekt (+5V):	100 W
Max aktuell utgång (+3,3V):	15 A
Max strömutgång (+12V):	45.8 A
Max aktuell utgång (+5V):	15 A
Max strömutgång (-12V):	0.3 A
Max strömutgång (+5Vsb):	2.5 A
Kombinerad effekt (-12V):	3.6 W
Kombinerad effekt (+5Vsb):	12.5 W
Antal SATA-strömkontakter:	4
Strömkontakt för diskettenhet:	1
ATX version:	2.31
Håll tid:	14 ms
PCI Express-strömkontakter (6+2-stift):	2
CPU-strömkontakt (4+4-stift):	Ja
SATA-strömkabelns längd:	760 mm
Längd på moderkortets strömkabel:	610 mm
PCI Express strömkabellängd:	720 mm
CPU-strömkabelns längd:	650 mm
PCI Express-kontakt:	Ja
Fördröjningsområde Effekt Bra signal:	100 - 500 ms
Längd perifer strömkabel (Molex):	760 mm